Plane a Door
Revision as of 09:58, 18 February 2017 by Kipkis (Kipkis | contribs) (importing article from wikihow)
Over time, doors may begin to stick and bind. Sometimes simply tightening the hinge screws will solve the problem, but occasionally it is necessary to resize the door. For large adjustments, you may need a saw, but to remove wood edges up to about {{safesubst:#invoke:convert|convert}}, you can plane the door edges to relieve the binding.
Steps
- Open and close the door to locate the trouble spots. Mark such spots with a pencil on both sides of the door so that you can maintain the door's symmetry.
- Remove the door from the frame. Unscrew the hinges from the door face. Tape the screws to the hinges to avoid misplacing them, and set them aside.
- Lay the door on a stable surface. You could balance it on sawhorses or a worktable, or you can lay it on the floor.
- Plane the hinge or lock sides of the door in the same direction of wood grain, applying light pressure to remove very small amounts of wood at a time.
- Plane the top or bottom edges of the door from the outside edges to the center, again removing only small amounts at a time. If possible, plane both sides equally to maintain the symmetry of the door.
- Re-hang the door, and check to see if it still sticks. If so, remove it and plane another small amount from the edges. Continue to plane from each side until the door no longer binds in its frame.
- Lightly sand the exposed wood to smooth it. Apply primer and paint the exposed surface, or apply wood sealer to the planed area. Replace the door, tightening the hinge screws properly to prevent sagging.
Video
Tips
- Apply masking tape to both sides of the door to lessen the risk of chipping.
- To remove larger sections of wood, start with a circular saw, then follow with a plane. Use a sandpaper block to smooth the last small areas.
- For best results, test and mark the door for sticking on a humid day so that you are checking when the door's wood is most swollen.
- If you only need to remove a tiny amount of wood on the top or lock side of the door, you can plane it while it is secured to the frame. Place a doorstop under the door to hold it steady, and put a sign on the opposite side to keep someone from knocking you over by moving it.
Warnings
- Check the fit frequently by replacing the door before removing more wood. While it is inconvenient to have to continue to remove and re-hang the door, doing so reduces the likelihood of removing too much and having to completely replace the door.
- Use protective eyewear, such as goggles or even sunglasses, to protect your eyes from wood splinters and sawdust.
Things You'll Need
- Pencil
- Screwdriver
- Tape
- Hand plane
- Sandpaper
- Sealer/paint
