Difference between revisions of "Use a Dremel Tool"
m (importing article from wikihow) |
m (Update ref tag) |
||
| Line 4: | Line 4: | ||
== Steps == | == Steps == | ||
===Learning the Basics=== | ===Learning the Basics=== | ||
| − | #Choose your Dremel. Dremel makes several models of rotary tools. Research which tools they're currently selling to find one that fits your needs. The price range varies so it's especially important to find out if you're getting the right tool. Options on Dremels include:<ref>https://www.youtube.com/watch?v=C7lq9ypDaXg</ref> | + | #Choose your Dremel. Dremel makes several models of rotary tools. Research which tools they're currently selling to find one that fits your needs. The price range varies so it's especially important to find out if you're getting the right tool. Options on Dremels include:<ref name="rf1">https://www.youtube.com/watch?v=C7lq9ypDaXg</ref> |
#*Fixed or corded models | #*Fixed or corded models | ||
#*Lightweight and mobile or sturdier and stronger | #*Lightweight and mobile or sturdier and stronger | ||
#*Longer battery life | #*Longer battery life | ||
#*Fixed speed (usually cheaper and easier to use) or variable speed (better for intricate grinding projects and more expensive) | #*Fixed speed (usually cheaper and easier to use) or variable speed (better for intricate grinding projects and more expensive) | ||
| − | #Read the owner's manual. Your Dremel will come with a variety of drill bits and other attachments, the tool, and an owner's manual. Be sure to read the manual before using your Dremel for the first time. This will also help you become familiar with the controls. Find out where the speed controls, on/off switch, and button to change the bit are located.<ref | + | #Read the owner's manual. Your Dremel will come with a variety of drill bits and other attachments, the tool, and an owner's manual. Be sure to read the manual before using your Dremel for the first time. This will also help you become familiar with the controls. Find out where the speed controls, on/off switch, and button to change the bit are located.<ref name="rf1" /> |
#*Since your model may be different than a previous year's model, it's important to read the manual that came with your tool. | #*Since your model may be different than a previous year's model, it's important to read the manual that came with your tool. | ||
| − | #Wear proper safety gear. Always wear work or rubber gloves when you run the Dremel. Gloves will keep your hands safe from debris and sharp edges. You should also wear safety glasses, especially when cutting, polishing, or grinding with the Dremel.<ref>http://mdm.boschwebservices.com/files/r00704v-1%20r19419v3.pdf</ref> | + | #Wear proper safety gear. Always wear work or rubber gloves when you run the Dremel. Gloves will keep your hands safe from debris and sharp edges. You should also wear safety glasses, especially when cutting, polishing, or grinding with the Dremel.<ref name="rf2">http://mdm.boschwebservices.com/files/r00704v-1%20r19419v3.pdf</ref> |
#*Keep your work space clean. You should also keep children and other people away while you're operating the tool. | #*Keep your work space clean. You should also keep children and other people away while you're operating the tool. | ||
| − | #Practice inserting and securing bits. To insert a bit, place the bit into the hole at the end of the Dremel and back it out slightly. Tighten the housing cap so that the bit is secure and doesn't wiggle. To remove the bit, press down on the shaft lock button while turning the collet. This should loosen the bit so you can replace it.<ref | + | #Practice inserting and securing bits. To insert a bit, place the bit into the hole at the end of the Dremel and back it out slightly. Tighten the housing cap so that the bit is secure and doesn't wiggle. To remove the bit, press down on the shaft lock button while turning the collet. This should loosen the bit so you can replace it.<ref name="rf1" /> |
#*Make sure to practice inserting and changing the bit when the Dremel is turned off and unplugged. | #*Make sure to practice inserting and changing the bit when the Dremel is turned off and unplugged. | ||
#Use the right bit for the job. You should choose your bit attachment based on the type of material you'll be working with. Dremel makes many bits with a variety of materials for almost any material. For example, for: | #Use the right bit for the job. You should choose your bit attachment based on the type of material you'll be working with. Dremel makes many bits with a variety of materials for almost any material. For example, for: | ||
| Line 21: | Line 21: | ||
#Make sure your Dremel is switched off before you plug it in. Once you plug it in, turn it on to the lowest setting and practice switching to different speeds. | #Make sure your Dremel is switched off before you plug it in. Once you plug it in, turn it on to the lowest setting and practice switching to different speeds. | ||
#*To get a feel for the Dremel, try using different grips to hold the tool. For intricate jobs, you might want to hold it like a pencil. Or, for a larger job firmly grip the tool so that your fingers wrap around it. | #*To get a feel for the Dremel, try using different grips to hold the tool. For intricate jobs, you might want to hold it like a pencil. Or, for a larger job firmly grip the tool so that your fingers wrap around it. | ||
| − | #*Use clamps or a vice to secure the material you are working on. <ref>http://mdm.boschwebservices.com/files/r00682v-1%20r19397v3.pdf</ref> | + | #*Use clamps or a vice to secure the material you are working on. <ref name="rf3">http://mdm.boschwebservices.com/files/r00682v-1%20r19397v3.pdf</ref> |
| − | #Clean your Dremel after each use. Remove the bit and place the bits back in the case. Take the time to wipe down the drill with a cloth after each use. Keeping your Dremel clean will significantly extend the life of the tool. Consult the owner’s manual before disassembling the tool for major cleanings.<ref | + | #Clean your Dremel after each use. Remove the bit and place the bits back in the case. Take the time to wipe down the drill with a cloth after each use. Keeping your Dremel clean will significantly extend the life of the tool. Consult the owner’s manual before disassembling the tool for major cleanings.<ref name="rf3" /> |
#*You will need to frequently use compressed air to clean out the Dremel's air vents. This will help prevent electrical failure. | #*You will need to frequently use compressed air to clean out the Dremel's air vents. This will help prevent electrical failure. | ||
| Line 32: | Line 32: | ||
#*If you're cutting thicker or tougher material, make several passes to cut it. | #*If you're cutting thicker or tougher material, make several passes to cut it. | ||
#*If you see smoke and discoloration, your speed is too high. If you hear the sound of the motor dropping or slowing down, you may be pressing too hard. Lighten the pressure and readjust the speed. | #*If you see smoke and discoloration, your speed is too high. If you hear the sound of the motor dropping or slowing down, you may be pressing too hard. Lighten the pressure and readjust the speed. | ||
| − | #Try cutting plastic. Fit a flat saw blade onto your Dremel. Remember to put on eye and ear protection before you begin cutting the plastic. Set the speed between 4 and 8 so you have enough power, but don't burn out the motor. Sand any rough edges once you've made the cuts.<ref>https://www.youtube.com/watch?v=Voj-tRCluiA</ref><ref | + | #Try cutting plastic. Fit a flat saw blade onto your Dremel. Remember to put on eye and ear protection before you begin cutting the plastic. Set the speed between 4 and 8 so you have enough power, but don't burn out the motor. Sand any rough edges once you've made the cuts.<ref name="rf4">https://www.youtube.com/watch?v=Voj-tRCluiA</ref><ref name="rf2" /> |
#*Avoid pressing down too hard while cutting, which can damage your Dremel. | #*Avoid pressing down too hard while cutting, which can damage your Dremel. | ||
#*Depending on your project, it may be helpful to draw an outline of your cuts onto the plastic. This will make it easier to ensure your cuts are where you want them to go. | #*Depending on your project, it may be helpful to draw an outline of your cuts onto the plastic. This will make it easier to ensure your cuts are where you want them to go. | ||
| − | #Practice cutting metal. Secure a metal cutting wheel onto your Dremel. Put on eye and ear protection before you start cutting. Turn on your Dremel and set the power between 8 and 10. Make sure the metal you're cutting is affixed firmly in place. Gently touch the Dremel to the metal for a few seconds at a time until you see the metal being cut. You'll also see sparks fly.<ref>https://www.youtube.com/watch?annotation_id=annotation_2394979499&feature=iv&src_vid=C7lq9ypDaXg&v=stdL-tNtedw</ref><ref | + | #Practice cutting metal. Secure a metal cutting wheel onto your Dremel. Put on eye and ear protection before you start cutting. Turn on your Dremel and set the power between 8 and 10. Make sure the metal you're cutting is affixed firmly in place. Gently touch the Dremel to the metal for a few seconds at a time until you see the metal being cut. You'll also see sparks fly.<ref name="rf5">https://www.youtube.com/watch?annotation_id=annotation_2394979499&feature=iv&src_vid=C7lq9ypDaXg&v=stdL-tNtedw</ref><ref name="rf2" /> |
#*Fiber reinforced disks are more durable than ceramic disks, which can shatter when cutting metal. | #*Fiber reinforced disks are more durable than ceramic disks, which can shatter when cutting metal. | ||
===Grinding, Sanding, and Polishing=== | ===Grinding, Sanding, and Polishing=== | ||
| − | #Grind using your Dremel. For grinding, attach grinding stones which can be fixed to the mandrel/shaft. Slide the grinding stone into the front of the tool where it is fully inserted and tighten. Turn your Dremel on and grind on a low setting so you don't overheat the material. Gently hold the grinding stone against the material until it wears down.<ref | + | #Grind using your Dremel. For grinding, attach grinding stones which can be fixed to the mandrel/shaft. Slide the grinding stone into the front of the tool where it is fully inserted and tighten. Turn your Dremel on and grind on a low setting so you don't overheat the material. Gently hold the grinding stone against the material until it wears down.<ref name="rf1" /> |
#*You can use grinding stones, grinding wheels, chain saw sharpening stones, abrasive wheels and abrasive points to grind a material. Carbide bits tend to work best on metal. | #*You can use grinding stones, grinding wheels, chain saw sharpening stones, abrasive wheels and abrasive points to grind a material. Carbide bits tend to work best on metal. | ||
#*Use cylindrical or triangular tips for round grinds. To grind a notch into something or grind an inside corner, use a flat disc shape. Or, use cylindrical or triangular tips for round grinds. | #*Use cylindrical or triangular tips for round grinds. To grind a notch into something or grind an inside corner, use a flat disc shape. Or, use cylindrical or triangular tips for round grinds. | ||
| − | #Start sharpening or sanding with your Dremel. Select a sandpaper bit and secure it in your Dremel. Tighten the screw at the end of the sandpaper bit. Turn on your Dremel and set it between 2 and 10. Choose lower settings if you're sanding or polishing plastics or woods. Select a higher setting if you're sanding metal. While holding the material secure, run the bit across the material so that the sandpaper bit completely comes into contact with your material and sharpens or sands it.<ref>https://www.youtube.com/watch?v=GwVbX4ZSqQM</ref> | + | #Start sharpening or sanding with your Dremel. Select a sandpaper bit and secure it in your Dremel. Tighten the screw at the end of the sandpaper bit. Turn on your Dremel and set it between 2 and 10. Choose lower settings if you're sanding or polishing plastics or woods. Select a higher setting if you're sanding metal. While holding the material secure, run the bit across the material so that the sandpaper bit completely comes into contact with your material and sharpens or sands it.<ref name="rf6">https://www.youtube.com/watch?v=GwVbX4ZSqQM</ref> |
#*Make sure that the sanding bits are in good shape so they don't scuff or mark your material. They should fit in the drill snugly and shouldn't be worn. Have several sanding bits on hand so you can quickly replace them. | #*Make sure that the sanding bits are in good shape so they don't scuff or mark your material. They should fit in the drill snugly and shouldn't be worn. Have several sanding bits on hand so you can quickly replace them. | ||
#*To sand, you can use sanding bands, sanding discs, flap wheels, shaping wheels and finishing and detail abrasive brushes. | #*To sand, you can use sanding bands, sanding discs, flap wheels, shaping wheels and finishing and detail abrasive brushes. | ||
| − | #Move from coarser bits to softer bits. If you've got a big job, begin with coarser bits before moving to softer bits. This can help you sand out larger scratches quickly and then you can have more control over working through the material. If you skip the coarse bit and begin with a softer bit, it will take you longer and you'll wear out the softer bit.<ref | + | #Move from coarser bits to softer bits. If you've got a big job, begin with coarser bits before moving to softer bits. This can help you sand out larger scratches quickly and then you can have more control over working through the material. If you skip the coarse bit and begin with a softer bit, it will take you longer and you'll wear out the softer bit.<ref name="rf1" /> |
#*Check the bit every minute or two to see if the bit is worn or torn. Remember to turn off and unplug the Dremel while you do this. | #*Check the bit every minute or two to see if the bit is worn or torn. Remember to turn off and unplug the Dremel while you do this. | ||
| − | #Polish metal or plastics. Rub a polishing compound over the surface of your object and fit your Dremel with a felt polishing tip or wheel. Start your drill at a low speed (2) and run it against the polishing compound. You should work the wheel in circles until the material is polished. Avoid using a much higher speed (don't go over 4).<ref | + | #Polish metal or plastics. Rub a polishing compound over the surface of your object and fit your Dremel with a felt polishing tip or wheel. Start your drill at a low speed (2) and run it against the polishing compound. You should work the wheel in circles until the material is polished. Avoid using a much higher speed (don't go over 4).<ref name="rf3" /> |
#*You can polish without using a compound, but you'll get shinier results with it. | #*You can polish without using a compound, but you'll get shinier results with it. | ||
#*For cleaning and polishing jobs, use rubber polishing points, polishing wheels and polishing brushes. These bits are good for taking old paint off of metal furniture or cleaning up tools and grills. | #*For cleaning and polishing jobs, use rubber polishing points, polishing wheels and polishing brushes. These bits are good for taking old paint off of metal furniture or cleaning up tools and grills. | ||
| Line 58: | Line 58: | ||
*Remember not to use too much pressure when you are cutting or sanding. Let the grit in the paper or cutter do all the work. | *Remember not to use too much pressure when you are cutting or sanding. Let the grit in the paper or cutter do all the work. | ||
*Start the tool so that it is up and running at full speed before you touch the material. | *Start the tool so that it is up and running at full speed before you touch the material. | ||
| − | *Your Dremel has brushes in it that should be good for 50 to 60 hours of use. If the tool doesn't seem to be working correctly, get your Dremel serviced.<ref>http://mdm.boschwebservices.com/files/2610030830%2001-13%20MM45%20r48208v3.pdf</ref> | + | *Your Dremel has brushes in it that should be good for 50 to 60 hours of use. If the tool doesn't seem to be working correctly, get your Dremel serviced.<ref name="rf7">http://mdm.boschwebservices.com/files/2610030830%2001-13%20MM45%20r48208v3.pdf</ref> |
== Warnings == | == Warnings == | ||
