Paint Aluminum Siding

Instead of replacing old aluminum siding, it is often more cost effective to repaint it. It's a very straightforward process and, provided you can set aside preparation and painting time, it is something most homeowners can do without professional assistance.

Steps

Preparing the Siding

1. Ensure that you’re dealing with aluminum. Painting vinyl or another metal material other than aluminum will be greatly different, so it’s important to be sure of what you’re about to paint.
   • Galvanized steel should not be painted with oil-based paint. Many paint manufacturers recommend using only latex paint over steel.
   • Determine if the siding has been previously painted and what kind of paint has been used. If possible, bring a sample to a professional.
   • Aluminum can be difficult to tell apart from vinyl if brand new. Check for cracks or dings in the siding. If the siding is cracked or broken, it is vinyl. Dings or bumps are an indication of aluminum.
   • Try tapping on the siding because aluminum sounds hollow and lightly metallic.
   • Use a magnet to determine if your siding is steel versus aluminum because magnet will stick to an steel siding but not aluminum. steel will also show red-brown rust.
2. Clean the siding. It’s best to use a power washer, angling the spray in the direction rain would hit the house as washing from the bottom up can cause unnecessary damage to the siding. If you choose to use any chemicals, complete a final rinse to remove remaining materials because residual chemicals can be damaging to your painting process.
   • If you’ve got stubborn stains, try cleaning with a biodegradable laundry detergent by mixing approximately ¼ cup (60 milliliters) detergent with 4 gallons (16 litres) of water.
   • Rub your hand along the siding when it is dry to check for chalking, which is common. If a powdery substance comes off, don’t be alarmed because this is chalking, which is normal in paint made for aluminum substances. This powdery substance acts as a self-cleaner for the siding. Simply choose a detergent containing TSP (trisodium phosphate) to remove the chalking.
   • Repair any damaged siding by banging out any dents or sags or removing unsalvageable pieces altogether.
3. Sand down the siding. Depending on how big the area is that you want to paint, you may want to use a power sander. Always start with a rough sandpaper and finish with a fine. Make sure to avoid etches and special molding, so that you don’t damage them. Give your siding a sweep afterwards, from the top down, to ensure you’ve removed all the metal filings and any chipped paint.
   • Use rough sandpaper (80 grit) to start your sanding. Do a rough once over while making sure to keep your motion in the same direction.
   • Move up to a more fine sandpaper (150 grit) and do a second pass over the siding.
   • If you want to use a power sander, be cautious when applying pressure to prevent any damage to the siding.
   • Don’t use less than 80 grit sandpaper as it can cause permanent damage to the metal.

Picking up the Right tools

1. Get a power/ pressure washer for cleaning the siding. Whether you ask your friends or need to rent one, there are cost effective ways to acquire a power washer, especially if you only plan to use it once.
   • Power washers can be rented inexpensively at a hardware store, so contact your local stores to compare prices and availability.
   • Pressure is typically measured in water per square inch which generally ranges from 2000psi to 2800psi for a gas powered washer vs 1300psi to 1700psi for an electric one. Higher pressure means higher power but it also means more noise, therefore, be aware of the disturbance you may create for your neighbours.
   • If they don’t come with the rental, don’t forget to use the proper safety tools that coincide with power washer use such as waterproof boots, goggles, gloves and ear protection.
2. Choose the correct primer. Look for an oil-based primer. The oil-base will absorb any chalking pigment and acts as an extra layer of protection from the outside elements.
   • You can also use an acrylic primer which will act as a strong base while sticking to metal and not reacting to any possibly-missed oxidation on the siding. Be cautious when using an acrylic primer, which can only be paired with acrylic paint.
   • Avoid latex primer since it generally contains ammonia, which reacts over time with aluminum to form microscopic gas bubbles and can lead to premature failure of the primer, removing the paint from the surface or the siding.
3. Choose the right paint. Select a paint meant for aluminum that’s acrylic exterior grade paint. This is an all-seasonal paint, which will hold up better, cover better and is less likely to fade.
   • Stay away from high gloss paints which reflect the sun’s glare. Try to select an eggshell or satin finish because it is more flattering for your home as it wears better than a matte finish.
4. Choose your painting method. Whether you use a brush, roller or sprayer, choose beforehand and know how to use your tool efficiently. Brushes, while most inexpensive, are the most time-intensive way to paint your siding. In contrast, using a spray machine will be the most time-effective way but also the most expensive. The happy medium would be using a roller; not only are they moderately priced, but they can also be used with relative ease.
   • When working with brushes or rollers, stick with synthetic fibre brushes or a lambswool roller. This will give your siding a smooth finish.
   • If you’re using a sprayer, use an airless sprayer with a .017 gun tip for a smooth application. While you can rent a professional machine in most areas, it’s best to compare prices and availability.
5. Determine if you’ll be needing a ladder. Both paint brushes and sprayers will need the added height associated with using a ladder. Straining to get the height and avoiding use of a ladder will leave paint splotchy and uneven.
   • Splurge and pick up a handle extension for your roller. With ranch-style homes, you’ll be able to forgo a ladder and use the handle extension. If you have a multiple story home, you’ll skip some steps on your ladder when reaching for the top of your siding.

Painting the Siding

1. Apply products on the right day. When priming and painting, weather must be considered. Each product will state acceptable temperature ranges but a good rule of thumb is to not paint in weather colder than 50 F (10 C) or on rainy days. Moisture from dew or rain will ruin a new application of paint.
   • When priming or painting, begin on a portion that is shaded from the sun as painting in direct sunlight can cause cracks and bubbles from drying too fast. In turn, any bubbles or cracks will have to be sanded out after drying.
2. Prime the siding and allow full drying time.After coating your roller in primer, roll quickly but with even pressure, along the panel of siding. Next, roll backwards in the opposite direction. This is to ensure an even and complete coat has been applied. Applying primer should only take a few seconds per foot applied. Apply at least two coats of primer sparingly to the siding to ensure proper coverage.
   • Don’t worry if you can see the metal or previous paint through the primer. Your coat should be thin enough to dry fast but still visible to the eye.
   • Always begin priming at one end of the siding. By working left to right, or right to left, rather than starting in the middle, the primer will dry evenly as you work. This is a great way to avoid visible lines dried within your progress.
   • Allow full drying time between coats. If you don’t wait long enough, peeling or bubbling can occur. Full drying time will vary between brands, however, a four hour drying time is a good rule of thumb.
   • Since it is to be covered up, primer can be great practice for airbrushing techniques.
3. Paint the siding. Paint in long, even strokes, making sure not to overdo it. If your paint is dripping then you have too much.
   • Work from the top down to eliminate dripping paint from ruining your hard work.
   • If your siding is horizontal, paint left to right. If vertical, paint up to down. This ensures even coats and will prevent you from missing any spots.
   • As a rule of thumb, paint takes two hours to dry. To test the dryness of your paint, touch the siding with your finger in an inconspicuous area. If the paint no longer feels tacky or sticky, it’s completely dried. This means you’re ready for your second coat.
   • Plan your breaks. Any siding that is partially painted and left to dry is at risk for lasting, visible lines. This can be avoided by finishing each individual piece of siding as you go.
4. Apply a second coat of paint. If any bumps are present within the first coat, they can be removed by an additional sanding before the second application of paint. Be gentle when removing impurities from the first coat because if you sand too hard you’ll be back at square one. Always check that that the initial paint is dried before continuing on with the second coat.
   • While a second coat of paint isn’t a necessity, it adds a look of professionalism. The second coat also increases the durability of the paint, overall increasing the value of your new siding.
   • If you’re seeing lines in your first coat, it’s because you’re painting too slow. A line in the color is from the paint drying and being over painted. To eliminate the line, try working in a smaller area while keeping your edges wet and painting your siding in panels without pausing in between strokes. Painting your second coat carefully will allow you to hide any lines from the first coat.

Tips

• If you pressure wash, you still may need to scrub some stains out of old paint.
• If you have chalking paint, a pressure washing is the best method for removal of chalking, but check your local water regulations because outside water use may be controlled if it's a drought season.

Warnings

• If you’ve never worked with a pressure washer or power sander before, be sure to follow all safety guidelines and practice before fully initiating the tool.
• Paint and primer fumes can be hazardous to your health, so wear a protective mask to avoid the fumes.
• Depending on how large your home is, make sure you have someone spotting you when using a ladder.

Things You’ll Need

• Paint
• Oil-based primer
• Sandpaper
• Paint rollers
• Roller extension handle
• Pressure washer

Related Articles

• Use a Paint Spray Machine
• Remove Limescale from Aluminum
• Paint Stainless Steel
• Remove Paint from Windows

Sources and Citations

See also

• Paint the Interior of a House
• Paint a Garage Door
• Stain Brick
• Paint Hardiplank
• Paint a Room
• Paint Your Basement Floor
• Paint Veneer
• Paint PVC
• Texture Paint
• Paint Wood

Read more ...

What links here

• Know when to Use Oil Based Paint Instead of Latex
• Make an Aluminum Can Ashtray
• Paint a Barn Quilt
• Remove Paint from Windows