Difference between revisions of "Scuff Up Boots"

Kipkis (Kipkis | contribs)
(importing article from wikihow)
 
Kipkis (Kipkis | contribs)
m (Text replacement - "[[Category: C" to "[[Category:C")
 
(4 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
== Steps ==
 
== Steps ==
 
=== Rubbing with Abrasives ===
 
=== Rubbing with Abrasives ===
#Go over the shoes with medium grain sandpaper. Sandpaper can be found at hardware stores and many supermarkets. Hold the sandpaper and begin to rub your shoes with it. Apply some pressure as you rub. Don’t rub over the entire surface of your shoes with the sandpaper. Only go over the parts where you would like to see marks.<ref>http://www.coconutandbean.com/2012/06/25/how-to-leather-to-suede/</ref>
+
#Go over the shoes with medium grain sandpaper. Sandpaper can be found at hardware stores and many supermarkets. Hold the sandpaper and begin to rub your shoes with it. Apply some pressure as you rub. Don’t rub over the entire surface of your shoes with the sandpaper. Only go over the parts where you would like to see marks.<ref name="rf1">http://www.coconutandbean.com/2012/06/25/how-to-leather-to-suede/</ref>
#Use a pumice block. A pumice block is typically used to remove dry skin, but it is also a great way to scuff up your boots. Hold the boot in one hand and the pumice block in the other hand. Rub the pumice block back and forth over one part of your boot. Move on to another part of your boot when you are satisfied with the marks. Repeat with the second boot.<ref> https://www.youtube.com/watch?v=zwvkjTGhHp0</ref>
+
#Use a pumice block. A pumice block is typically used to remove dry skin, but it is also a great way to scuff up your boots. Hold the boot in one hand and the pumice block in the other hand. Rub the pumice block back and forth over one part of your boot. Move on to another part of your boot when you are satisfied with the marks. Repeat with the second boot.<ref name="rf2"> https://www.youtube.com/watch?v=zwvkjTGhHp0</ref>
 
#* You can find a pumice block online, at a beauty supply store, or at many supermarkets.  
 
#* You can find a pumice block online, at a beauty supply store, or at many supermarkets.  
#Rub with a wire brush. A wire brush is good to use for lighter, wispier scuff marks. Hold the boot in one hand and the wire brush in the other. Go over the boot in a back-and-forth motion. It may take a couple of minutes to achieve noticeable scuff marks. Move on to other parts of the boot and then repeat on the second boot.<ref> http://www.coconutandbean.com/2012/06/25/how-to-leather-to-suede/</ref>
+
#Rub with a wire brush. A wire brush is good to use for lighter, wispier scuff marks. Hold the boot in one hand and the wire brush in the other. Go over the boot in a back-and-forth motion. It may take a couple of minutes to achieve noticeable scuff marks. Move on to other parts of the boot and then repeat on the second boot.<ref name="rf3"> http://www.coconutandbean.com/2012/06/25/how-to-leather-to-suede/</ref>
#Use a scouring pad. Scouring pads are made out of steel and wool and are typically used to clean tough surfaces, which makes them great for making scuff marks. Use the scouring pad to get larger, more noticeable marks. Simply rub the scouring pad over the part of the shoe where you would like to see marks—like on the toe. It may take some time to achieve the desired scuff marks.<ref> https://www.youtube.com/watch?v=5tnlgmvSm50</ref>
+
#Use a scouring pad. Scouring pads are made out of steel and wool and are typically used to clean tough surfaces, which makes them great for making scuff marks. Use the scouring pad to get larger, more noticeable marks. Simply rub the scouring pad over the part of the shoe where you would like to see marks—like on the toe. It may take some time to achieve the desired scuff marks.<ref name="rf4"> https://www.youtube.com/watch?v=5tnlgmvSm50</ref>
 
=== Using Tools ===
 
=== Using Tools ===
#Bang the toes and heels of the shoes with a hammer. You can use any type of hammer. Lay the boots on the ground or on the table. Gently tap the toes and heels of the shoes with the hammer. The hammer may not produce scuff marks as well on other parts of the shoe. Do not use too much force, or you may damage the shoe more than intended. <ref> http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
+
#Bang the toes and heels of the shoes with a hammer. You can use any type of hammer. Lay the boots on the ground or on the table. Gently tap the toes and heels of the shoes with the hammer. The hammer may not produce scuff marks as well on other parts of the shoe. Do not use too much force, or you may damage the shoe more than intended. <ref name="rf5"> http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
#Make marks with a rock. Find a fairly large rock that you can hold with one hand. The rock should have a few sharp edges. Hold the rock and begin to buff the boot. Then, strike the heel and toe of the boot in a downward, diagonal motion. Continue to hit the boot until the desired results are achieved.<ref>http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
+
#Make marks with a rock. Find a fairly large rock that you can hold with one hand. The rock should have a few sharp edges. Hold the rock and begin to buff the boot. Then, strike the heel and toe of the boot in a downward, diagonal motion. Continue to hit the boot until the desired results are achieved.<ref name="rf6">http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
#Use a hacksaw. Be very, very careful when using a hacksaw. Gently scrape the hacksaw over the shoes in one quick motion. You should see several small and thin marks on the boots. Then, move the hacksaw down and across the boot to see larger marks. Do not use too much force, or you may end up with holes in your shoes.<ref>https://www.youtube.com/watch?v=gQ4_0EfD3Gc</ref>
+
#Use a hacksaw. Be very, very careful when using a hacksaw. Gently scrape the hacksaw over the shoes in one quick motion. You should see several small and thin marks on the boots. Then, move the hacksaw down and across the boot to see larger marks. Do not use too much force, or you may end up with holes in your shoes.<ref name="rf7">https://www.youtube.com/watch?v=gQ4_0EfD3Gc</ref>
 
=== Driving Over Your Boots ===
 
=== Driving Over Your Boots ===
#Inspect your boots for durability. You should not use this technique if your boots are very thin or made out of easily damaged material. Look over your boots to see how thick and durable the material is. Real leather boots, like Doc Martens, should be fine.<ref>http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
+
#Inspect your boots for durability. You should not use this technique if your boots are very thin or made out of easily damaged material. Look over your boots to see how thick and durable the material is. Real leather boots, like Doc Martens, should be fine.<ref name="rf6" />
#Ask a friend to supervise. You can do this alone, but it is safer to ask someone to be there with you when you run over the shoes. Ask your friend to stand outside of the car as you run over the shoes. They can tell you to stop if the shoes are being damaged too much.<ref>http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
+
#Ask a friend to supervise. You can do this alone, but it is safer to ask someone to be there with you when you run over the shoes. Ask your friend to stand outside of the car as you run over the shoes. They can tell you to stop if the shoes are being damaged too much.<ref name="rf6" />
#Find a pebbly surface. You can use any surface, but a pebbly surface is ideal to use because it creates a nice texture. If you can’t find a pebbly surface, you can place the boots on your driveway or asphalt. Avoid unpaved surfaces, like dirt roads, unless you don’t mind your shoes getting dirty and stained.<ref>http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
+
#Find a pebbly surface. You can use any surface, but a pebbly surface is ideal to use because it creates a nice texture. If you can’t find a pebbly surface, you can place the boots on your driveway or asphalt. Avoid unpaved surfaces, like dirt roads, unless you don’t mind your shoes getting dirty and stained.<ref name="rf6" />
#Place the top part of the boot under your tire. Do not put the heel or toe boot under the tire because it may crumple under the pressure. Only put the top part of the boot under the tire. Line it up with the tire so you know exactly what you will be driving over.<ref>http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
+
#Place the top part of the boot under your tire. Do not put the heel or toe boot under the tire because it may crumple under the pressure. Only put the top part of the boot under the tire. Line it up with the tire so you know exactly what you will be driving over.<ref name="rf6" />
 
#*This will not work well if you have boots that don’t have much of a top part, like ankle boots.  
 
#*This will not work well if you have boots that don’t have much of a top part, like ankle boots.  
#Drive over the boots a few times. Once you have lined the boots up with your tire, go over the boots back and forth a few times with your car. Get out of the car, inspect the boots, and turn them over to the other side. Repeat on the other side. Then, repeat the process on the other boot.<ref>http://blog.freepeople.com/2014/06/distress-boots-free-people/</ref>
+
#Drive over the boots a few times. Once you have lined the boots up with your tire, go over the boots back and forth a few times with your car. Get out of the car, inspect the boots, and turn them over to the other side. Repeat on the other side. Then, repeat the process on the other boot.<ref name="rf6" />
 
== Tips ==  
 
== Tips ==  
*Stuff your shoes with crumpled up magazines or newspaper so that they keep the shape while you work.<ref>http://www.coconutandbean.com/2012/06/25/how-to-leather-to-suede/</ref>
+
*Stuff your shoes with crumpled up magazines or newspaper so that they keep the shape while you work.<ref name="rf1" />
*You can use acetone to discolor the boots. Pour a little bit of acetone on a paper towel and rub it on the boots until you see the color begin to fade.<ref>https://www.youtube.com/watch?v=gQ4_0EfD3Gc</ref>
+
*You can use acetone to discolor the boots. Pour a little bit of acetone on a paper towel and rub it on the boots until you see the color begin to fade.<ref name="rf7" />
 
*It is also an option to use techniques from all three methods to scuff up your boots.
 
*It is also an option to use techniques from all three methods to scuff up your boots.
 
== Warnings ==
 
== Warnings ==