Difference between revisions of "Install a Wood Fence Post"
(importing article from wikihow) |
m (Update ref tag) |
||
| Line 6: | Line 6: | ||
#*Due to additional strain, gate posts work better when installed in concrete. | #*Due to additional strain, gate posts work better when installed in concrete. | ||
#Choose a durable fence post. Follow local advice if possible, since climate and availability will affect this decision. Unless you live in a desert, it pays to choose durable lumber, which comes in two varieties: | #Choose a durable fence post. Follow local advice if possible, since climate and availability will affect this decision. Unless you live in a desert, it pays to choose durable lumber, which comes in two varieties: | ||
| − | #*Posts made entirely from durable heartwood. Western juniper, black locust, and Osage-orange are excellent choices. Pacific yew, redwood, and most cedar and white oak species can last 20+ years in most conditions.<ref>http://juniper.orst.edu/post-farm.htm</ref> | + | #*Posts made entirely from durable heartwood. Western juniper, black locust, and Osage-orange are excellent choices. Pacific yew, redwood, and most cedar and white oak species can last 20+ years in most conditions.<ref name="rf1">http://juniper.orst.edu/post-farm.htm</ref> |
#*Pressure-treated wood with about 1 inch (2.5cm) sapwood surrounding a core of heartwood. Aspen, ponderosa pine, lodgepole pine, and Douglas fir are suitable examples. Buy this from a trusted source to avoid poorly treated wood. | #*Pressure-treated wood with about 1 inch (2.5cm) sapwood surrounding a core of heartwood. Aspen, ponderosa pine, lodgepole pine, and Douglas fir are suitable examples. Buy this from a trusted source to avoid poorly treated wood. | ||
#*''Note'' — All lumber should be labeled as suitable for ground contact. Not all pressure-treated wood is intended for burial. | #*''Note'' — All lumber should be labeled as suitable for ground contact. Not all pressure-treated wood is intended for burial. | ||
#Prep the wood against moisture (optional). The sawn-off ends of the fence post are vulnerable to moisture. Consider these precautions if you live in a damp climate: | #Prep the wood against moisture (optional). The sawn-off ends of the fence post are vulnerable to moisture. Consider these precautions if you live in a damp climate: | ||
| − | #*Bevel the top of the fence post to a 45º angle to encourage rain runoff, or plan on installing a post cap.<ref>http://poststar.com/lifestyles/columns/natl/houseworks/concrete-is-a-no-no-for-fence-posts/article_eee2a8aa-9bd9-11e1-a9c4-0019bb2963f4.html</ref> | + | #*Bevel the top of the fence post to a 45º angle to encourage rain runoff, or plan on installing a post cap.<ref name="rf2">http://poststar.com/lifestyles/columns/natl/houseworks/concrete-is-a-no-no-for-fence-posts/article_eee2a8aa-9bd9-11e1-a9c4-0019bb2963f4.html</ref> |
| − | #*Treat the two ends with a non-water-based, brush-on wood preservative, such as copper naphthenate. Wood preservatives are toxic, so follow safety recommendations on the label.<ref>http://www.extension.umn.edu/garden/yard-garden/landscaping/selecting-preservative-treated-wood/#posttreatment-handling</ref> Apply multiple coats of the copper naphthenate and make sure to let it dry for 24 hours after each application. | + | #*Treat the two ends with a non-water-based, brush-on wood preservative, such as copper naphthenate. Wood preservatives are toxic, so follow safety recommendations on the label.<ref name="rf3">http://www.extension.umn.edu/garden/yard-garden/landscaping/selecting-preservative-treated-wood/#posttreatment-handling</ref> Apply multiple coats of the copper naphthenate and make sure to let it dry for 24 hours after each application. |
| − | #Dig the hole. As a general rule, an 8 foot post needs to be placed so that two feet of it are in the ground. If you plan to anchor the post in soil, the hole diameter should be as close to the fence post size as possible. If you plan to anchor the post in gravel, dig a bit wider — roughly 8 inches (20cm) across for a standard 4x4 post.<ref>http://www.fencespecialists.com/fencing-tips/how-to-install-sturdy-fence-posts/</ref> | + | #Dig the hole. As a general rule, an 8 foot post needs to be placed so that two feet of it are in the ground. If you plan to anchor the post in soil, the hole diameter should be as close to the fence post size as possible. If you plan to anchor the post in gravel, dig a bit wider — roughly 8 inches (20cm) across for a standard 4x4 post.<ref name="rf4">http://www.fencespecialists.com/fencing-tips/how-to-install-sturdy-fence-posts/</ref> |
#*Use a post hole digger to dig a straight-walled hole. If the soil is hard, cut through the sod with a shovel and/or let water soak into the dirt. | #*Use a post hole digger to dig a straight-walled hole. If the soil is hard, cut through the sod with a shovel and/or let water soak into the dirt. | ||
#*Keep some dirt (or dirt mixed with gravel) nearby to backfill the hole. | #*Keep some dirt (or dirt mixed with gravel) nearby to backfill the hole. | ||
| Line 19: | Line 19: | ||
#Position the post in the hole. Center the post in the hole, and get it level and in line with the other posts. An assistant will be useful to hold this in place during installation. However, if you are going to yourself have some 1"x 4"x 4' or longer material available. Then, drive wooden stakes into the ground on two sides and attach them with screws to the 1"x 4" to brace for “plumbing" (vertical level). | #Position the post in the hole. Center the post in the hole, and get it level and in line with the other posts. An assistant will be useful to hold this in place during installation. However, if you are going to yourself have some 1"x 4"x 4' or longer material available. Then, drive wooden stakes into the ground on two sides and attach them with screws to the 1"x 4" to brace for “plumbing" (vertical level). | ||
#*Make sure that you measure the distance between your posts to ensure that the top and bottom rails will fit. | #*Make sure that you measure the distance between your posts to ensure that the top and bottom rails will fit. | ||
| − | #Fill the hole with tamped crushed stone or soil. Crushed stone offers better drainage than soil, and may improve stability as well if well tamped and installed in dense soil. Whether using crushed stone or ordinary soil, shovel it in 3–5 inches (7.5–12.5cm) at a time, tamping well after each batch.<ref>http://www.tractorsupply.com/know-how_Fencing_how-to-set-fence-posts-in-concrete-and-gravel</ref> Repeat until the hole is filled. | + | #Fill the hole with tamped crushed stone or soil. Crushed stone offers better drainage than soil, and may improve stability as well if well tamped and installed in dense soil. Whether using crushed stone or ordinary soil, shovel it in 3–5 inches (7.5–12.5cm) at a time, tamping well after each batch.<ref name="rf5">http://www.tractorsupply.com/know-how_Fencing_how-to-set-fence-posts-in-concrete-and-gravel</ref> Repeat until the hole is filled. |
#*Before each tamping, hold a level against the post and adjust until level. | #*Before each tamping, hold a level against the post and adjust until level. | ||
#*If you'd like to plant grass at the base of the post, use soil for the last couple inches (several cm), not gravel. | #*If you'd like to plant grass at the base of the post, use soil for the last couple inches (several cm), not gravel. | ||
| Line 27: | Line 27: | ||
#Set posts in concrete when stability is extra important. Concrete may be necessary if you are installing a fence in sandy soil, or in very soft, muddy soil. It's also a good idea when installing gate posts to provide extra stability. The main downside to concrete is its ability to trap water around the post. This can reduce the lifespan of the post by many years. The installation described here avoids this problem with a gravel base and an open-bottomed concrete sleeve. | #Set posts in concrete when stability is extra important. Concrete may be necessary if you are installing a fence in sandy soil, or in very soft, muddy soil. It's also a good idea when installing gate posts to provide extra stability. The main downside to concrete is its ability to trap water around the post. This can reduce the lifespan of the post by many years. The installation described here avoids this problem with a gravel base and an open-bottomed concrete sleeve. | ||
#Prepare your fence posts. All fence posts should be made from durable lumber labeled for ground contact. For more information on selecting and prepping your fence posts, see the method above. | #Prepare your fence posts. All fence posts should be made from durable lumber labeled for ground contact. For more information on selecting and prepping your fence posts, see the method above. | ||
| − | #Dig a wide hole. A typical 4x4 fence post requires a concrete sleeve about 12 inches (30cm) across.<ref | + | #Dig a wide hole. A typical 4x4 fence post requires a concrete sleeve about 12 inches (30cm) across.<ref name="rf4" /> Plan to bury ⅓ of the post, then allow a few inches (several cm) for the base beneath it. A large post hole digger or post driver will make this job much easier. |
#*Power tools can be dangerous if the soil is rocky. You may need to use a clamshell digger instead, plus a long digging bar to lever out rocks. | #*Power tools can be dangerous if the soil is rocky. You may need to use a clamshell digger instead, plus a long digging bar to lever out rocks. | ||
#*The width of the hole should be consistent the whole way down, not cone shaped. | #*The width of the hole should be consistent the whole way down, not cone shaped. | ||
#Add a few inches of gravel. A base of gravel or crushed stone will greatly improve drainage. Pour 4 to 6 inches (10 to 15cm) into the hole and tamp it level. | #Add a few inches of gravel. A base of gravel or crushed stone will greatly improve drainage. Pour 4 to 6 inches (10 to 15cm) into the hole and tamp it level. | ||
| − | #Brace the post. Position the post in the center of the hole, using a level to guide you to a vertical position. To hold the post in place, drop two stakes into the soil near two adjacent sides of the post. Nail or screw scrap lumber between the stake and the post. Don't pound the nails or screw the screws all the way into the post, so you can easily remove them later.<ref | + | #Brace the post. Position the post in the center of the hole, using a level to guide you to a vertical position. To hold the post in place, drop two stakes into the soil near two adjacent sides of the post. Nail or screw scrap lumber between the stake and the post. Don't pound the nails or screw the screws all the way into the post, so you can easily remove them later.<ref name="rf4" /> |
#Repeat for each post hole. Dig every post hole and brace each post so you can pour the concrete all at once. Use a string between corner posts to ensure that all fence posts are in line with each other. | #Repeat for each post hole. Dig every post hole and brace each post so you can pour the concrete all at once. Use a string between corner posts to ensure that all fence posts are in line with each other. | ||
#Add more gravel. Another layer of tamped gravel will further improve drainage. | #Add more gravel. Another layer of tamped gravel will further improve drainage. | ||
| − | #[[Make-Concrete|Mix your concrete]]. Put on safety glasses and waterproof gloves.<ref>http://www.familyhandyman.com/masonry/pouring-concrete/how-to-properly-mix-concrete/view-all</ref> Pour a full bag of concrete mix (or as much as you can transport) into your wheelbarrow and mix in about 90% of the recommended water according to the label. Mix for a few minutes to check the final consistency, then slowly add more water until the concrete feels like paste.<ref>http://www.motherearthnews.com/diy/garden-yard/installing-concrete-footing-ze0z1401zcov.aspx?PageId=2</ref> | + | #[[Make-Concrete|Mix your concrete]]. Put on safety glasses and waterproof gloves.<ref name="rf6">http://www.familyhandyman.com/masonry/pouring-concrete/how-to-properly-mix-concrete/view-all</ref> Pour a full bag of concrete mix (or as much as you can transport) into your wheelbarrow and mix in about 90% of the recommended water according to the label. Mix for a few minutes to check the final consistency, then slowly add more water until the concrete feels like paste.<ref name="rf7">http://www.motherearthnews.com/diy/garden-yard/installing-concrete-footing-ze0z1401zcov.aspx?PageId=2</ref> |
#*To save effort, you can rent a portable concrete mixer or the services of a concrete truck. | #*To save effort, you can rent a portable concrete mixer or the services of a concrete truck. | ||
| − | #*To save money, make your own concrete mix: 1 part Portland cement, 2 parts sand, and 3 parts coarse gravel, by volume.<ref>http://matse1.matse.illinois.edu/concrete/bm.html</ref> | + | #*To save money, make your own concrete mix: 1 part Portland cement, 2 parts sand, and 3 parts coarse gravel, by volume.<ref name="rf8">http://matse1.matse.illinois.edu/concrete/bm.html</ref> |
| − | #*Some fast-setting concrete mixes can be poured in dry, then mixed with water in the hole. These mixes tend to be weaker and more expensive, so speed comes at a high price.<ref | + | #*Some fast-setting concrete mixes can be poured in dry, then mixed with water in the hole. These mixes tend to be weaker and more expensive, so speed comes at a high price.<ref name="rf7" /> |
#*Be careful not to make the concrete too runny. Add the water in small increments until the concrete comes off of the shovel easily. | #*Be careful not to make the concrete too runny. Add the water in small increments until the concrete comes off of the shovel easily. | ||
#Fill the hole with concrete. Shovel concrete into the hole up to soil level. Work quickly enough to use each batch of concrete before it hardens. Take care not to splash cement onto the post. | #Fill the hole with concrete. Shovel concrete into the hole up to soil level. Work quickly enough to use each batch of concrete before it hardens. Take care not to splash cement onto the post. | ||
#Trowel the concrete into a slope shape. Smoothly cap off the top of the cement with a trowel, grading it outwards from the post. Aim for a slope roughly ½ inch (1.25cm) above ground level, dropping to about 1 inch (2.5cm) below ground level. This pitch will allow the water to flow off the post, preventing pools of water that promote decay. | #Trowel the concrete into a slope shape. Smoothly cap off the top of the cement with a trowel, grading it outwards from the post. Aim for a slope roughly ½ inch (1.25cm) above ground level, dropping to about 1 inch (2.5cm) below ground level. This pitch will allow the water to flow off the post, preventing pools of water that promote decay. | ||
#Allow at least three days for the concrete to cure. Give the concrete some time to dry and harden before building the fence or putting any weight on the post. | #Allow at least three days for the concrete to cure. Give the concrete some time to dry and harden before building the fence or putting any weight on the post. | ||
| − | #Seal the gap between post and concrete. Once the initial curing is complete, seal the gap around the base of the fence post. This gap will widen with natural expansion and frost, allowing water to pool here and cause rot. Seal it with a sealant that bonds to concrete and wood, such as some silicone sealants or exterior acrylic latex caulk.<ref>http://www.familyhandyman.com/garden-structures/fences/how-to-set-fence-posts-that-won-t-rot/view-all</ref> | + | #Seal the gap between post and concrete. Once the initial curing is complete, seal the gap around the base of the fence post. This gap will widen with natural expansion and frost, allowing water to pool here and cause rot. Seal it with a sealant that bonds to concrete and wood, such as some silicone sealants or exterior acrylic latex caulk.<ref name="rf9">http://www.familyhandyman.com/garden-structures/fences/how-to-set-fence-posts-that-won-t-rot/view-all</ref> |
== Video == | == Video == | ||
| Line 48: | Line 48: | ||
== Tips == | == Tips == | ||
| − | *Give the fence time to lose its natural moisture before you paint it, or the paint could trap the moisture and encourage rot.<ref>http://www2.ca.uky.edu/forestryextension/publications/for_forfs/forfs03_05.pdf</ref> Depending on the humidity and how freshly the wood was cut, drying could take up to a few months. You may also consider a water repellent stain, which lasts longer than paint. | + | *Give the fence time to lose its natural moisture before you paint it, or the paint could trap the moisture and encourage rot.<ref name="rf10">http://www2.ca.uky.edu/forestryextension/publications/for_forfs/forfs03_05.pdf</ref> Depending on the humidity and how freshly the wood was cut, drying could take up to a few months. You may also consider a water repellent stain, which lasts longer than paint. |
*Install your corner posts first. Once they are in place, running a string between them can guide the placement of additional fence posts. Usually, corner or end posts are bigger than other types of posts and they are built in an “H” bracing design using another post for stability. If the posts are in dirt, then they should also be deeper in the ground than field posts. | *Install your corner posts first. Once they are in place, running a string between them can guide the placement of additional fence posts. Usually, corner or end posts are bigger than other types of posts and they are built in an “H” bracing design using another post for stability. If the posts are in dirt, then they should also be deeper in the ground than field posts. | ||
== Warnings == | == Warnings == | ||
*Most wood will slowly warp over time. This is much more noticeable in some species than others. | *Most wood will slowly warp over time. This is much more noticeable in some species than others. | ||
| − | *Always call the National Digline at 811 to request that utility companies come out and mark areas where pipes and wires may be before doing any digging.<ref> http://call811.com/</ref> | + | *Always call the National Digline at 811 to request that utility companies come out and mark areas where pipes and wires may be before doing any digging.<ref name="rf11"> http://call811.com/</ref> |
| − | *Some types of pressure treatment and wood preservative contains harmful chemicals. Wood treated with chromated copper arsenate (CCA) is the most notorious, but is no longer sold to homeowners in the US or EU. If you are using CCA-treated wood, do not place it where it could contact drinking water or animals that may chew on it. Wear a respirator while sawing it, and do not burn the scrap.<ref>http://www.epa.gov/oppad001/reregistration/cca/cca_qa.htm</ref><ref>http://www.herinst.org/CCAtimber/regulations/Europe.html</ref> | + | *Some types of pressure treatment and wood preservative contains harmful chemicals. Wood treated with chromated copper arsenate (CCA) is the most notorious, but is no longer sold to homeowners in the US or EU. If you are using CCA-treated wood, do not place it where it could contact drinking water or animals that may chew on it. Wear a respirator while sawing it, and do not burn the scrap.<ref name="rf12">http://www.epa.gov/oppad001/reregistration/cca/cca_qa.htm</ref><ref name="rf13">http://www.herinst.org/CCAtimber/regulations/Europe.html</ref> |
==Sources and Citations== | ==Sources and Citations== | ||
