Difference between revisions of "Install a Modem"
m (importing article from wikihow) |
m (Text replacement - "[[Create-a-Wireless-Network" to "[[Create a Wireless Network") |
||
| Line 20: | Line 20: | ||
#*If you are using DSL, you will need to install filters first into a phone line. | #*If you are using DSL, you will need to install filters first into a phone line. | ||
#Power the modem on. Once you’ve connected the modem to the service source, power it on by plugging it on and pressing the power button (if applicable). Wait a minute or two for the modem to boot up completely. The power light should be solid, while your connection light may be blinking because the modem hasn’t been activated yet. | #Power the modem on. Once you’ve connected the modem to the service source, power it on by plugging it on and pressing the power button (if applicable). Wait a minute or two for the modem to boot up completely. The power light should be solid, while your connection light may be blinking because the modem hasn’t been activated yet. | ||
| − | #Connect your computer to the modem. Using an Ethernet cable, connect your computer to the internet or WAN port on the back of the modem. This will connect your computer directly to the internet. You can [[Create | + | #Connect your computer to the modem. Using an Ethernet cable, connect your computer to the internet or WAN port on the back of the modem. This will connect your computer directly to the internet. You can [[Create a Wireless Network|set up your wireless network]] after the modem has been activated. |
#Start the activation process. Depending on your modem and service provider, you may need to run a setup program before you use the modem. In other cases, you may need to open a web browser and then follow the on-screen prompts to activate your service. Refer to the directions provided by your service provider to be sure.<ref> http://www.centurylink.com/help/index.php?assetid=135</ref> | #Start the activation process. Depending on your modem and service provider, you may need to run a setup program before you use the modem. In other cases, you may need to open a web browser and then follow the on-screen prompts to activate your service. Refer to the directions provided by your service provider to be sure.<ref> http://www.centurylink.com/help/index.php?assetid=135</ref> | ||
#*Some internet service providers may need you to call with the MAC address of the modem. The MAC address is found on a sticker that's either on the back or the side of the modem. It looks something like “00-00-00-00-00-00”, but with a mixture of letters and numbers. | #*Some internet service providers may need you to call with the MAC address of the modem. The MAC address is found on a sticker that's either on the back or the side of the modem. It looks something like “00-00-00-00-00-00”, but with a mixture of letters and numbers. | ||
