Difference between revisions of "Do Squats With a Resistance Band"

Kipkis (Kipkis | contribs)
(importing article from wikihow)
 
Kipkis (Kipkis | contribs)
m (Text replacement - "[[Category: C" to "[[Category:C")
 
(7 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
===Preparing to Do a Basic Squat===
 
===Preparing to Do a Basic Squat===
 
#Select your band.  Resistance bands vary in tension (how much force they can resist when pulled).  Usually, you will want to choose a medium-moderate tension band.  If you have little to no experience doing squats or using resistance bands, try a lower tension band, which is more elastic.  A high tension band is for very fit, experienced users and is more difficult to stretch.
 
#Select your band.  Resistance bands vary in tension (how much force they can resist when pulled).  Usually, you will want to choose a medium-moderate tension band.  If you have little to no experience doing squats or using resistance bands, try a lower tension band, which is more elastic.  A high tension band is for very fit, experienced users and is more difficult to stretch.
#Balance the resistance band.  This means ensuring the right and left sides of the resistance band are equal in length.  To do this, grab the handles of the resistance band and dangle the elastic portion in front of you, on the floor.<Ref>http://www.bodybuilding.com/exercises/detail/view/name/squats-with-bands</ref>  Place the arches of both feet firmly in the center of the band and stand up straight with your feet hip width apart.  
+
#Balance the resistance band.  This means ensuring the right and left sides of the resistance band are equal in length.  To do this, grab the handles of the resistance band and dangle the elastic portion in front of you, on the floor.<ref name="rf1">http://www.bodybuilding.com/exercises/detail/view/name/squats-with-bands</ref>  Place the arches of both feet firmly in the center of the band and stand up straight with your feet hip width apart.  
 
#Check the bands.  Make sure you have an equal length of each band on each side.  To do this, keep your feet on the band and bring the handles together in front of you without stretching the band.  If the handles meet in a symmetrical “kiss,” your bands are balanced.
 
#Check the bands.  Make sure you have an equal length of each band on each side.  To do this, keep your feet on the band and bring the handles together in front of you without stretching the band.  If the handles meet in a symmetrical “kiss,” your bands are balanced.
 
#*If they are unbalanced, step off the band try to balance the resistance band again.  You may need to step onto the band more than once to find its center.  As you get more familiar with the resistance band, you’ll learn to more intuitively find the band’s center.
 
#*If they are unbalanced, step off the band try to balance the resistance band again.  You may need to step onto the band more than once to find its center.  As you get more familiar with the resistance band, you’ll learn to more intuitively find the band’s center.
#Assume the starting position.  While standing straight up, lift the handles of the resistance band above your shoulders.  Keep the bands behind your arms and keep your elbows down to keep the band in place.  Your hands, gripping the handles of the resistance band, should have their backs facing directly behind you and palms forward.<Ref>http://build-muscle-101.com/resistance-band-leg-exercises/</ref>   
+
#Assume the starting position.  While standing straight up, lift the handles of the resistance band above your shoulders.  Keep the bands behind your arms and keep your elbows down to keep the band in place.  Your hands, gripping the handles of the resistance band, should have their backs facing directly behind you and palms forward.<ref name="rf2">http://build-muscle-101.com/resistance-band-leg-exercises/</ref>   
  
 
===Performing a Basic Squat With a Resistance Band===
 
===Performing a Basic Squat With a Resistance Band===
Line 15: Line 15:
 
#*Step onto the resistance band.  Make sure you’re situating yourself in the exact center of the resistance band’s elastic portion.
 
#*Step onto the resistance band.  Make sure you’re situating yourself in the exact center of the resistance band’s elastic portion.
 
#*Stand up straight with the resistance band’s handles in your hands.  The band should be stretched up and behind your arms.  If someone were standing in front of you, they’d see the resistance band stretched taut in an elongated “U” shape.   
 
#*Stand up straight with the resistance band’s handles in your hands.  The band should be stretched up and behind your arms.  If someone were standing in front of you, they’d see the resistance band stretched taut in an elongated “U” shape.   
#*Keep your abs and core tight and upright.  Bend your knees slightly and keep your head and eyes facing forward.<Ref>http://greatist.com/fitness/perfect-squat</ref>  You’re now ready to begin the squat.
+
#*Keep your abs and core tight and upright.  Bend your knees slightly and keep your head and eyes facing forward.<ref name="rf3">http://greatist.com/fitness/perfect-squat</ref>  You’re now ready to begin the squat.
#Get low.  Bend forward slightly from the hips, then bend your knees.<Ref>http://www.bodybuilding.com/exercises/detail/view/name/squats-with-bands</ref>  Keep your back rigid and your shoulders and head up; you’re not taking a bow.  Your kneecaps should extend past the end of your toes.  Imagine that you’re lowering yourself into a chair behind you.
+
#Get low.  Bend forward slightly from the hips, then bend your knees.<ref name="rf1" />  Keep your back rigid and your shoulders and head up; you’re not taking a bow.  Your kneecaps should extend past the end of your toes.  Imagine that you’re lowering yourself into a chair behind you.
 
#*Continue to keep your abs tight, and when you’ve reached a position where you feel as if you might tip backwards, hold it for about two seconds.   
 
#*Continue to keep your abs tight, and when you’ve reached a position where you feel as if you might tip backwards, hold it for about two seconds.   
#Return to the starting position.  Come up slowly, using your heels to push yourself up.<Ref>http://greatist.com/fitness/perfect-squat</reF>  Continue to hold the resistance band.  Don’t let go!  If you let of the resistance band, you won’t be doing squats with a resistance band; you’ll just be doing squats.  And anyone can do that, right?  Tighten your glutes as you return to the standing position you began from.
+
#Return to the starting position.  Come up slowly, using your heels to push yourself up.<ref name="rf3" />  Continue to hold the resistance band.  Don’t let go!  If you let of the resistance band, you won’t be doing squats with a resistance band; you’ll just be doing squats.  And anyone can do that, right?  Tighten your glutes as you return to the standing position you began from.
 
#Don’t strain yourself.  Especially if it’s your first time doing squats, stay conscious of your body’s movement and position.  The load of the lift, when you return to a standing position, should be on your legs and hamstrings, not your back.  Remember to hold on to the handles of the resistance band.<ref>https://rugbywarfare.com/top-3-strength-exercises-2/</ref>   
 
#Don’t strain yourself.  Especially if it’s your first time doing squats, stay conscious of your body’s movement and position.  The load of the lift, when you return to a standing position, should be on your legs and hamstrings, not your back.  Remember to hold on to the handles of the resistance band.<ref>https://rugbywarfare.com/top-3-strength-exercises-2/</ref>   
 
#*Have a trainer watch you as you perform your squat to give you feedback and pointers on your technique.
 
#*Have a trainer watch you as you perform your squat to give you feedback and pointers on your technique.
 
#*If you have a friend or personal trainer familiar with how to squat with a resistance band, have him or her show you how to perform a proper squat with a resistance band.  Then try it on your own, using their example to guide your own squatting efforts.
 
#*If you have a friend or personal trainer familiar with how to squat with a resistance band, have him or her show you how to perform a proper squat with a resistance band.  Then try it on your own, using their example to guide your own squatting efforts.
#Try a squat shoulder press.  The squat shoulder press is a variation of the basic squat with a resistance band.  Assume the basic squat position and squat down.  Instead of just standing up with the handles still beside you, parallel to your shoulders, extend your hands up as you rise.  Raise the handles of the resistance band high above your head.  Hold the position for three seconds before dropping them back down to your shoulders in preparation for another squat.<REf>http://www.drgourmet.com/exercise/resistanceband/squatshldrpressresband.shtml</ref><Ref>http://www.drgourmet.com/exercise/resistanceband/squatshldrpressresband.shtml</ref>
+
#Try a squat shoulder press.  The squat shoulder press is a variation of the basic squat with a resistance band.  Assume the basic squat position and squat down.  Instead of just standing up with the handles still beside you, parallel to your shoulders, extend your hands up as you rise.  Raise the handles of the resistance band high above your head.  Hold the position for three seconds before dropping them back down to your shoulders in preparation for another squat.<ref name="rf4">http://www.drgourmet.com/exercise/resistanceband/squatshldrpressresband.shtml</ref><ref name="rf4" />
  
 
===Doing a Resistance Band Speed Squat Exercise===
 
===Doing a Resistance Band Speed Squat Exercise===
#Attach your band to a squat rack.  Sling the handles around the safety bars extending out from the squat rack.  The distance from one handle to the other should be about one meter.  The ends of the resistance band should sit at two parallel points at about waist height.<Ref>https://basketballhq.com/resistance-band-speed-squat-exercise</ref>
+
#Attach your band to a squat rack.  Sling the handles around the safety bars extending out from the squat rack.  The distance from one handle to the other should be about one meter.  The ends of the resistance band should sit at two parallel points at about waist height.<ref name="rf5">https://basketballhq.com/resistance-band-speed-squat-exercise</ref>
 
#*For a more intense workout, affix the resistance band so the handles are just below waist height.  The lower the points at which the band is anchored, the more challenging this exercise will be.
 
#*For a more intense workout, affix the resistance band so the handles are just below waist height.  The lower the points at which the band is anchored, the more challenging this exercise will be.
 
#*Ensure your band is securely fastened and there is no risk of it snapping back on you or a bystander.
 
#*Ensure your band is securely fastened and there is no risk of it snapping back on you or a bystander.
#Sit on a medicine ball.  The medicine ball should be situated directly between the two points where the band is anchored.  Use one slightly larger than a basketball; its weight is irrelevant since you won’t be lifting it.  The ball is only a marker to let you know how deep you’re squatting.  For a more intense workout, use a smaller ball.<Ref>https://basketballhq.com/resistance-band-speed-squat-exercise</ref>
+
#Sit on a medicine ball.  The medicine ball should be situated directly between the two points where the band is anchored.  Use one slightly larger than a basketball; its weight is irrelevant since you won’t be lifting it.  The ball is only a marker to let you know how deep you’re squatting.  For a more intense workout, use a smaller ball.<ref name="rf5" />
 
#Assume the squat position.  Unlike the standard, basic squat, you will not hold the resistance band in this exercise.  The band will remain fastened to the squat rack or other immobile object.  The only points of contact you will have with the band will be your neck and arms.   
 
#Assume the squat position.  Unlike the standard, basic squat, you will not hold the resistance band in this exercise.  The band will remain fastened to the squat rack or other immobile object.  The only points of contact you will have with the band will be your neck and arms.   
 
#*Wrap the band around the back of your neck so that it loops over your shoulders.  Hook the inside of your elbows into the band.
 
#*Wrap the band around the back of your neck so that it loops over your shoulders.  Hook the inside of your elbows into the band.
 
#*With the band still hooked behind your neck and over your shoulders, push yourself off the medicine ball into a standing position.  Keep your feet shoulder width apart and bend your knees slightly.  Like in all other squats, your core and abs should be tight and your shoulders should be pushed back.  Sit your hips back and put your weight on your heels.  Focus your eyes on a point about six feet ahead of you.
 
#*With the band still hooked behind your neck and over your shoulders, push yourself off the medicine ball into a standing position.  Keep your feet shoulder width apart and bend your knees slightly.  Like in all other squats, your core and abs should be tight and your shoulders should be pushed back.  Sit your hips back and put your weight on your heels.  Focus your eyes on a point about six feet ahead of you.
#Squat.  Bend slightly forward and drop your butt to the surface of the ball.  When you’ve just barely touched the surface of the ball, push yourself back up with your heels using as much force as you can.  Try to jump up from the squat.  Don’t be afraid to let your feet leave the ground.  Return to the upright starting position, keeping your gluteal muscles tight as you do so.<Ref>https://basketballhq.com/resistance-band-speed-squat-exercise</ref>
+
#Squat.  Bend slightly forward and drop your butt to the surface of the ball.  When you’ve just barely touched the surface of the ball, push yourself back up with your heels using as much force as you can.  Try to jump up from the squat.  Don’t be afraid to let your feet leave the ground.  Return to the upright starting position, keeping your gluteal muscles tight as you do so.<ref name="rf5" />
 
#*This exercise will help you develop a more powerful lower body and train your muscular endurance.  
 
#*This exercise will help you develop a more powerful lower body and train your muscular endurance.  
#Go for speed.  After you’ve gotten the basic technique down, test yourself with a speed squat variation.  Go up and down from the ball to a standing “ready” position as fast as possible, for 10-20 reps.  Don’t bounce off the ball; barely touch it before launching yourself back up.  Each time you come up and down, aim to do so at the same speed.  This will help you build endurance.<REF>https://basketballhq.com/resistance-band-speed-squat-exercise</REf>
+
#Go for speed.  After you’ve gotten the basic technique down, test yourself with a speed squat variation.  Go up and down from the ball to a standing “ready” position as fast as possible, for 10-20 reps.  Don’t bounce off the ball; barely touch it before launching yourself back up.  Each time you come up and down, aim to do so at the same speed.  This will help you build endurance.<ref name="rf5" />
 
#*Be careful not to let your knees collapse (angle inward toward each other).
 
#*Be careful not to let your knees collapse (angle inward toward each other).
  
 
===Using Resistance Bands to Build Upper Back Strength Through Squats===
 
===Using Resistance Bands to Build Upper Back Strength Through Squats===
 
#Set up the resistance band.  Unlike the standard, basic squat, you will not hold the resistance band in this exercise.  The band will remain fastened to the squat rack or other immobile object.  The only point of contact you will have with the band will be the back of your neck.   
 
#Set up the resistance band.  Unlike the standard, basic squat, you will not hold the resistance band in this exercise.  The band will remain fastened to the squat rack or other immobile object.  The only point of contact you will have with the band will be the back of your neck.   
#*Affix the band to a point on the floor approximately one meter ahead of you.  Make sure it’s latched securely on a heavy, immobile piece of gym equipment such as a squat rack.  Facing the point on the floor to which the band is affixed, wrap the loop of the band around the back of your neck.<Ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
+
#*Affix the band to a point on the floor approximately one meter ahead of you.  Make sure it’s latched securely on a heavy, immobile piece of gym equipment such as a squat rack.  Facing the point on the floor to which the band is affixed, wrap the loop of the band around the back of your neck.<ref name="rf6">http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
 
#Pick up your kettle bells.  For this exercise, you will use kettle bells to balance and build strength.  Put them in the front rack position, with each kettle bell resting on your shoulder/upper arm.  Grip the handles with each hand and keep your palms facing inward, towards one another.  Your thumbs should be just under -- almost touching -- your chin.  Keep your elbows angled out and away from you and your palms facing each other.
 
#Pick up your kettle bells.  For this exercise, you will use kettle bells to balance and build strength.  Put them in the front rack position, with each kettle bell resting on your shoulder/upper arm.  Grip the handles with each hand and keep your palms facing inward, towards one another.  Your thumbs should be just under -- almost touching -- your chin.  Keep your elbows angled out and away from you and your palms facing each other.
 
#*The weight of the kettle bell depends on your fitness level.  Try starting with two twenty pound weights and work up from there.
 
#*The weight of the kettle bell depends on your fitness level.  Try starting with two twenty pound weights and work up from there.
#*You could also substitute a bar bell in place of the kettle bells.<Ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
+
#*You could also substitute a bar bell in place of the kettle bells.<ref name="rf6" />
#Assume the basic squat position.  Tighten your stomach muscles and upper body.  Position each foot below its corresponding shoulder.  In other words, keep your right foot in a vertical line with your right shoulder, and your left foot in line with your left shoulder.  Bend slightly at the knees.  With your eyes and head up and looking ahead, you’re ready to begin the squat.<Ref>http://greatist.com/fitness/perfect-squat</ref>   
+
#Assume the basic squat position.  Tighten your stomach muscles and upper body.  Position each foot below its corresponding shoulder.  In other words, keep your right foot in a vertical line with your right shoulder, and your left foot in line with your left shoulder.  Bend slightly at the knees.  With your eyes and head up and looking ahead, you’re ready to begin the squat.<ref name="rf3" />   
 
#Descend in a squatting motion.  Unlike in the standard squat, do not make a slight bend forward as you go down; the pull from the resistance band may cause you to topple over.  Keeping your neck and back rigid, bend gently at the knees and come down until your bottom almost touches the ground.  At your lowest point, your butt should be lower than your kneecaps.  Your knees will be angled out, away from each other, and extend past your toes.  
 
#Descend in a squatting motion.  Unlike in the standard squat, do not make a slight bend forward as you go down; the pull from the resistance band may cause you to topple over.  Keeping your neck and back rigid, bend gently at the knees and come down until your bottom almost touches the ground.  At your lowest point, your butt should be lower than your kneecaps.  Your knees will be angled out, away from each other, and extend past your toes.  
#*If your thigh and shin form a 90˚ angle at your knee, you’re being pulled forward too much, or are not squatting low enough.<ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
+
#*If your thigh and shin form a 90˚ angle at your knee, you’re being pulled forward too much, or are not squatting low enough.<ref name="rf6" />
#Hold it.  Hold your position at the bottom of your squat for three to four seconds.  Keep your back rigid and your shoulders and head up.  You should be able to feel the pull of the resistance band on the back of your neck, tugging your head down and your body forward.  Lean back into the band and keep your neck rigid.  Do not let yourself hunch over.<Ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
+
#Hold it.  Hold your position at the bottom of your squat for three to four seconds.  Keep your back rigid and your shoulders and head up.  You should be able to feel the pull of the resistance band on the back of your neck, tugging your head down and your body forward.  Lean back into the band and keep your neck rigid.  Do not let yourself hunch over.<ref name="rf6" />
 
#*In this exercise, by resisting the pull of the resistance band, you will build the musculature in your upper back.
 
#*In this exercise, by resisting the pull of the resistance band, you will build the musculature in your upper back.
 
#Return to a standing position.  Push up off the ground with your heels and come to a full stand.  Keep your back and neck rigid as you rise.  Keep the weights in your hand and resistance band around your neck until you are ready to finish your workout.   
 
#Return to a standing position.  Push up off the ground with your heels and come to a full stand.  Keep your back and neck rigid as you rise.  Keep the weights in your hand and resistance band around your neck until you are ready to finish your workout.   
Line 53: Line 53:
  
 
===Correcting Strength Imbalances===
 
===Correcting Strength Imbalances===
#Think about your strength imbalances.  Often when we do squats, we favor one side or another of our bodies, leaning more heavily on our right or left foot.  With a resistance band, we can correct this imbalance by forcing ourselves to shift weight and turn our hips toward the leg we usually do not favor. <Ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
+
#Think about your strength imbalances.  Often when we do squats, we favor one side or another of our bodies, leaning more heavily on our right or left foot.  With a resistance band, we can correct this imbalance by forcing ourselves to shift weight and turn our hips toward the leg we usually do not favor. <ref name="rf6" />
 
#*This exercise will also strengthen weak quads (the muscles of the the thigh) by pulling the knee forward.   
 
#*This exercise will also strengthen weak quads (the muscles of the the thigh) by pulling the knee forward.   
#Attach your band to a squat rack.  Wrap the resistance band around a heavy fixed object such as a squat rack.  Position it at a level on the same plane as your knee or upper shin.<Ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
+
#Attach your band to a squat rack.  Wrap the resistance band around a heavy fixed object such as a squat rack.  Position it at a level on the same plane as your knee or upper shin.<ref name="rf6" />
 
#*Ensure your band is securely fastened and there is no risk of it snapping back on you or a bystander.
 
#*Ensure your band is securely fastened and there is no risk of it snapping back on you or a bystander.
 
#*In this exercise, you will not hold the handles of the resistance band.  The band will only touch the back of your leg.  It will remain fastened to the squat rack or some other immobile object.  
 
#*In this exercise, you will not hold the handles of the resistance band.  The band will only touch the back of your leg.  It will remain fastened to the squat rack or some other immobile object.  
#Place the band around your leg.  Slip whichever leg you want to strengthen through the band.  If, for instance, you usually shift your weight to your right leg, wrap the band around your left leg.  Then, stand about one meter away from the point at which the band is affixed and place your left foot into the loop so that the band is touching the space right behind your knee.<Ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>
+
#Place the band around your leg.  Slip whichever leg you want to strengthen through the band.  If, for instance, you usually shift your weight to your right leg, wrap the band around your left leg.  Then, stand about one meter away from the point at which the band is affixed and place your left foot into the loop so that the band is touching the space right behind your knee.<ref name="rf6" />
 
#*Ideally, the band will be pulling the leg straight out, but it is also acceptable for the band is affixed to a squat rack at a slight angle.
 
#*Ideally, the band will be pulling the leg straight out, but it is also acceptable for the band is affixed to a squat rack at a slight angle.
 
#Pick up your weights.  You can use either kettle bells or a barbell.  If using a barbell, place the bar behind your neck and lift it off the rack with both hands.  Angle your neck down slightly to better allow the weight to be borne on your shoulders.  If using kettle bells, pick them up and assume the front rack position, with each kettle bell resting on your shoulder/upper arm.  Hold each kettle bell by the handle, letting it hang off the ends of your fingers.  They should sit on or near your shoulders or inner deltoids.  Your palms should face inward, towards each other.  Place your thumbs a bit under your chin.  Angle your elbows away from your body, and make each of your palms face the palm on the opposite side of your body.
 
#Pick up your weights.  You can use either kettle bells or a barbell.  If using a barbell, place the bar behind your neck and lift it off the rack with both hands.  Angle your neck down slightly to better allow the weight to be borne on your shoulders.  If using kettle bells, pick them up and assume the front rack position, with each kettle bell resting on your shoulder/upper arm.  Hold each kettle bell by the handle, letting it hang off the ends of your fingers.  They should sit on or near your shoulders or inner deltoids.  Your palms should face inward, towards each other.  Place your thumbs a bit under your chin.  Angle your elbows away from your body, and make each of your palms face the palm on the opposite side of your body.
 
#*Don’t round your spine when lifting kettle bells.  This could cause injury and places an undue strain on your back. Squat down to pick the kettle bells up, and keep your back rigid in a vertical or slight diagonal orientation when standing up.<ref>https://books.google.com/books?id=Jul2rOipGHoC&lpg=PT54&dq=how%20to%20lift%20kettlebells&pg=PT54#v=onepage&q&f=false</ref>
 
#*Don’t round your spine when lifting kettle bells.  This could cause injury and places an undue strain on your back. Squat down to pick the kettle bells up, and keep your back rigid in a vertical or slight diagonal orientation when standing up.<ref>https://books.google.com/books?id=Jul2rOipGHoC&lpg=PT54&dq=how%20to%20lift%20kettlebells&pg=PT54#v=onepage&q&f=false</ref>
#Lean on it.  Put more weight on the leg which has the band wrapped around it to ensure it doesn’t slide.<ref>http://breakingmuscle.com/strength-conditioning/fixing-common-squat-and-deadlift-problems-with-bands</ref>  This will help train you to use both legs, rather than just your dominant leg, when lifting.  As you continue to use the resistance band to correct your weak leg’s strength imbalance, your body will develop muscle memory and you’ll eventually be able to assume the same strength-correcting position without using the resistance band.
+
#Lean on it.  Put more weight on the leg which has the band wrapped around it to ensure it doesn’t slide.<ref name="rf6" />  This will help train you to use both legs, rather than just your dominant leg, when lifting.  As you continue to use the resistance band to correct your weak leg’s strength imbalance, your body will develop muscle memory and you’ll eventually be able to assume the same strength-correcting position without using the resistance band.
#Prepare to perform a squat.  Preparing to do a squat requires a few specific physical actions.  First, tense your arms, neck, shoulders, and belly muscles.  Next, relax at the knees.  Your thigh and calf should form an obtuse angle measuring approximately ten degrees.Your eyes and head should face forward.<Ref>http://greatist.com/fitness/perfect-squat</ref>  Maintain this position until it is time to perform the squat.
+
#Prepare to perform a squat.  Preparing to do a squat requires a few specific physical actions.  First, tense your arms, neck, shoulders, and belly muscles.  Next, relax at the knees.  Your thigh and calf should form an obtuse angle measuring approximately ten degrees.Your eyes and head should face forward.<ref name="rf3" />  Maintain this position until it is time to perform the squat.
#Move your body into a lower position.  Bend forward slightly from the hips, then bend your knees.<Ref>http://www.bodybuilding.com/exercises/detail/view/name/squats-with-bands</ref>  Your back should remain stiff and your head and shoulders should be oriented in a forward direction.  Your kneecaps should reach beyond the tips of your toes.
+
#Move your body into a lower position.  Bend forward slightly from the hips, then bend your knees.<ref name="rf1" />  Your back should remain stiff and your head and shoulders should be oriented in a forward direction.  Your kneecaps should reach beyond the tips of your toes.
 
#*Continue to keep your abdomen tight.  When you feel you've squatted as low as possible without falling backward, freeze.   
 
#*Continue to keep your abdomen tight.  When you feel you've squatted as low as possible without falling backward, freeze.   
#*After two or three seconds, return to the starting position.  Come up slowly, using your heels to push yourself up.<Ref>http://greatist.com/fitness/perfect-squat</reF>  Tighten your glutes as you return to the standing position you began from.
+
#*After two or three seconds, return to the starting position.  Come up slowly, using your heels to push yourself up.<ref name="rf3" />  Tighten your glutes as you return to the standing position you began from.
  
 
== Tips ==
 
== Tips ==
Line 77: Line 77:
 
== Warnings ==
 
== Warnings ==
 
*Potential injuries to your knees may be incurred if this exercise is performed incorrectly. Never let them bend more than 90 while doing this exercise. <ref>http://www.resistancebands.info/squat-exercises-with-resistance-bands/</ref>
 
*Potential injuries to your knees may be incurred if this exercise is performed incorrectly. Never let them bend more than 90 while doing this exercise. <ref>http://www.resistancebands.info/squat-exercises-with-resistance-bands/</ref>
*The back is also at risk with squats.  If you have back issues, consult your physician or personal trainer before trying squats.<Ref>http://www.bodybuilding.com/exercises/detail/view/name/front-barbell-squat</ref>
+
*The back is also at risk with squats.  If you have back issues, consult your physician or personal trainer before trying squats.<ref name="rf7">http://www.bodybuilding.com/exercises/detail/view/name/front-barbell-squat</ref>
  
 
== Things You Need ==
 
== Things You Need ==