Draw a Plane

Learn how to draw an airplane by following the simple steps in this tutorial.

Steps

Draw an oval for the front part of the plane.
Draw a curve on the left part of the oval for the nose and a semi rectangle for the plane fuselage.
Draw a triangle for the back part then draw a trapezoid above it for the tail fin.
Draw a set of semi trapezoids for the wings and stabilizer.
Draw another small trapezoid for the winglets and small triangles for the funnel connector.
Draw a set of ovals for the funnels.
Based on the outline, draw the whole body of the plane.
Add details such as the windows, doors, wing details and funnel details.
Erase unnecessary lines!
Color your airplane!

Draw a long curved shape. Note that the left end looks more like a C.
Draw an inverted version of the first curve you have drawn on top to connect the ends of the curves to produce a rough outline of the airplane’s body.
Sketch the airplane’s wings on each side using a slanted rectangle.
Draw a quadrilateral shape on the rear part of the plane to serve as the horizontal and vertical stabilizer.
Erase unnecessary lines from the outline.
Draw curved lines beneath the wings for the engine.
Add details to the plane like windows and doors.
Color the drawing and add clouds or other planes for details.

Draw a big X shape at the center of the paper. This will be the guide in drawing the plane. Press down lightly with your pencil so that it is easy to erase.
Using one of the slanted lines as guide, draw a rectangular shape on the lower left side. Add a triangular shape connected to the rectangle extending towards the right upper line. Remember to skip the pointed end of the triangle, instead, replace it with a small slanted line so that it appears to have four angles. This will serve as the body of the plane.
To make it appear three dimensional, reproduce the same shape on the bottom of the original one and connect it with vertical lines.
Draw the cockpit or flight deck of the airplane using quadrilaterals on top of the plane’s body.
Draw extended rectangles on each side of the plane for the wings.
Add the horizontal and vertical stabilizers of the rear part of the plane.
Draw the landing gear using a circle and connect this to the plane using slanted lines.
Draw the propeller and spinner on the frontal part of the airplane.
Erase unnecessary lines and refine details of the drawing.
Add color to the drawing.