Build a Berm

Berms are raised mounds of earth, usually forming a long ridge. These attractive landscaping features provide more soil depth for planting and help block sound and wind. Mountain bikers build heavy-duty berms to create banked turns.

Steps

Building a Berm for Your Garden

1. Plan the shape of your berm. A berm looks most natural when it follows a curve or sinuous shape, blending into other curves in the landscape. As a guideline, keep the berm about 4 to 6 times as long as it is wide.
2. Determine the slope and height. To minimize problems with erosion, water runoff, and mowing difficulty, keep the maximum gradient below 5:1 (five times as wide as it is tall). 4:1 is possible but risky, and anything steeper requires specialized plants and erosion control. Most berms in home gardens are no taller than 24 inches (61 cm).
   • An asymmetric appearance improves the aesthetics, with an off-center peak and a variety of slopes along the berm's length.
3. Consider the drainage. Berms can act as miniature dams, altering the water flow in your garden. You may need to Dig-Swales between the berms, build a culvert running through the berm, or regrade your garden. You may want to discuss this with a professional landscaper if you are building a tall berm (especially above 24 inches / 61 cm), or if you live in a rainy climate.
   • A flat top reduces runoff and provides more water to plants growing on the side of the berm.
   • While building your berm, do your best to avoid compacting the soil at the base with heavy equipment. If it's already compacted, Fix-Compacted-Soil by digging 8 inches (20 cm) deep to improve drainage.
4. Break up the soil lightly. Dig into the surface of the area along the path of your berm. This creates a stronger bond with the next layer of soil.
5. Build the base from affordable materials . With a shovel or bobcat, pile on fill dirt, compacting it periodically. Shape it according to the layout you decided on, except 1 ft (30 cm) smaller on all sides. Rake it smooth and get all proportions as exact as possible.
   • Well-compacted clay soil is recommended for steep or tall berms. Loam will typically collapse at slopes steeper than 35%.
   • Gravel is cheaper, but the soil tends to wash through it — and it is not compliant with some local codes. If you use it, cover it with at least 1 inch (2.5 cm) of compacted clay.
6. Add the topsoil layer. Spread out a layer of topsoil over the entire berm, mixing it with the top 2–3 inches (5–7.5 cm) of clay. Pile on more topsoil to form a layer 1 ft (30 cm) thick.
7. Compact the soil lightly. Roll an empty lawn roller over the top layer of soil, or tamp it down with your feet or a board. The berm will settle over time as water seeps through it, but a light compaction should be enough to minimize erosion.
8. Plant on the surface. Get-and-Maintain-a-Healthy-Lawn over the berm, along with shrubs and trees in a pattern that doesn't interfere with mowing or walking. Apply-Mulch while the plants are establishing roots to prevent erosion.

Building a Berm for Mountain Biking

1. Plan the shape and location of the berm. Also called an inslope turn, a berm is a turn with a surface tilted toward the inside of the curve, helping bikers navigate it smoothly without losing speed. Whether your berm is a slight curve or a full semicircle, keep the radius between 10 and 15 feet (3–45.m). The slope of the berm can be as gentle as a 7% slope, but steep downhill turns require a steeper angle.
   • Building the turn around a tree, large rock, or other obstacle discourages bikers from short-cutting the turn. Make sure the obstacle doesn't block line of sight, and that it's not close enough to hit someone's head when they lean into the turn.
   • For your first berm, avoid a sideslope (slope between the two sides of the turn) steeper than a 4:1 gradient (25%). Steeper slopes require a turning platform, which takes a lot more work.
2. Clear all organic material from the area. This includes topsoil, which will decompose and crumble if used on your trail. Build your berm with bare, mineral soil only.
3. Build-a-Retaining-Wall. Steep berms and berms built onto steep slopes require a retaining wall to prevent collapse. This is a big job, so consider working with experienced builders, or building a berm with a gentle slope instead (10 degrees, for instance). There are two approaches if you decide to go this route:
   • Flat, square stones weighing at least 50 lbs (23 kg) make the best retaining walls. Lock the stones together with smaller rocks and "deadmen" logs extending into the bank to prevent wobbling, then backfill each layer with small rocks and mineral soil.
   • Wooden retaining walls take less labor, but rot over time. Use pressure treated wood rated for ground contact ("heavy duty" or "extreme" ground contact in wet climates). Lay deadmen logs into the bank, attached to the wall with notched log cabin construction.
4. Tamp down a thin layer of dirt. To support mountain biking without eroding, the berm must be extra sturdy. Lay down 2–4 inches (5–10 cm) along the turn in the trail, and compact it as hard as you can using a McLeod rake or hoe. Trying to compact the whole pile of dirt at once will create a weak berm that won't hold together for long.
   • The soil must compact and cohere well. If it is too loose and sandy, mix in clay fill.
   • Powered compaction tools are difficult to use for this project, since they flatten the curve of the riding surface.
5. Direct water off the trail. As you build, incorporate a wide drain at the downhill edge of the turn to direct water off the trail surface. Add a slight grade in the opposite direction before and after your turn for the same reason.
6. Build the berm up in layers. Rough up the surface of the berm a little, add another 2–4 inches (5–10 cm) of soil, and compact again. Repeat this to build the berm to the desired shape and height.
   • The rough surface helps the layers attach to each other, improving strength. A light sprinkle of water also helps.
   • You can incorporate small rocks in the lower layers, but the top surface should be pure mineral soil only.
7. Perfect the surface. Once your berm has reached the desired height and shape, make the surface as smooth as possible, with a constant slope. Give the berm a test ride and make adjustments until the turn feels smooth. For instance, if the turn feels too abrupt, you may need a wider radius, or a longer lead up into the berm.

Video

Template:Video:Build a Berm

Tips

• Berms can help block sound. For best results, build your berm with a gentle slope and cover it in bark mulch instead of grass. A short wall on top (less than half the height of the berm) also helps.
• If the berm is going to receive high foot traffic, then lay a soil-backed sod. This is more expensive per piece and heavier to move.
• The mountain bike instruction describe a traditional berm built up above the surface, but it's also possible to create a sloped turn by digging into the ground. This takes less effort, but it can be hard to achieve a smooth transition between the turn and the flat trail.
• Starter fertilizer or rooting hormones can help new sod establish roots.

Related Articles

• Dig-Swales
• Automatically Fill Your Decorative Garden Fountain
• Add a Birdbath to Your Mailbox
• Choose a Lawn Grass
• Build a Bridge in the Woods

Sources and Citations

See also

• Clean Deck Wood
• Build a Storm Shelter
• Excavate a Trench
• Build a Pulley
• Install Posts in the Water for a Dock or Pier
• Build a Greenhouse
• Learn to Read Blueprints
• Reduce Stormwater Runoff at Your Home
• Build a French Drain
• Make Fake Rocks with Concrete

Read more ...

What links here

• Build Porch Steps