Access a Linksys Router

In order to change the settings on a Linksys router, you will need to gain access to the device's web interface. A number of different tasks can be performed from the router's web interface, such as applying firmware updates, changing firewall and network security settings, and switching between dynamic and static IP addresses. This article provides instructions on how to access the router's web interface for any Linksys device still under the manufacturer's support.

Steps

1. Locate a Linksys router's default gateway for Windows users. The device's default gateway address will need to be located so that you can gain access the web interface for the router. Open the start menu and type "cmd" into the search field, located just below the All Programs menu. The command screen will open on the desktop.
   • Type "ipconfig" into the command screen to pull up the device's configuration information. The router's default gateway will be listed near the top of the command screen, underneath the subnet mask. The default gateway address has been determined.
2. Determine a Linksys router's default gateway for Mac OS X users. Click the Apple icon on the menu bar and select System Preferences. The network menu will open. Select Internet & Wireless.
   • Click the Advanced button in the network dialogue box and open the TCP/IP tab to view the network configuration settings. Record the default gateway address and exit the dialogue box. The default gateway has been located.
3. Access a Linksys router via the web interface with the default gateway address. Type the default gateway address into the Internet browser's address bar and press enter. The device's web interface will open.
   • Use the default username and password if prompted. The default username and password will vary depending on the device being used and the Internet service provider. However, in most cases, the default user name will be "admin" and the password will also be "admin." In some cases, the default user name has been set to "Administration" and no password has been set.
   • Enter the device's default username and password if prompted when attempting to access the router. Try pressing enter immediately after entering the default user name. If prompted again for a username and password, type "admin" in both the username and password fields and press enter again.
4. Reset the password on a Linksys router. If a prior password has been set and lost, you can reset the router so that the default username and password can be used to access the device's web interface. Use a paper clip to press and hold the recessed reset button located on the back of the router for 30 seconds to complete the password reset.

Video

Template:Video:Access a Linksys Router

Tips

• It is recommended that the router's current settings be backed up prior to making any changes to the device's configuration settings. From the Linksys web interface, click the Administration tab and select Configuration Management from the menu options. Click Back Up to save the file (Config.bin) to a location on your computer's hard drive.

Related Articles

• Update Linksys Firmware

Sources and Citations

• http://www.linksys.com/us/support-article?articleNum=136612
• http://www.thegeekstuff.com/2009/06/how-to-upgrade-linksys-wireless-router-firmware/
• http://www.dslreports.com/faq/8756

See also

• Tag People in a Discord Chat on a PC or Mac
• Use Your Own Router With Verizon FiOS
• Install a Modem
• Set up a Private Network
• Connect Two Computers
• Block Your IP Address
• Find Your IP Address on a Mac
• Connect Two Computers Using USB
• Connect to a VPN
• Set Up Port Forwarding on a Router

Read more ...

What links here

• Access a U Verse Router
• Convert Linksys WRT54G to Be an Access Point
• Configure a Linksys Router