Make Cool Weather Minimalist Running Shoes

Revision as of 08:39, 17 June 2016 by Kipkis (Kipkis | contribs) (importing article from wikihow)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Minimalist running is the idea that human feet are very well adapted to supporting weight and running. Studies show that runners use 4% less energy when they run barefoot.[1] International athletes (like Zola Budd-Pieterse from South Africa and the late Abebe Bikila from Ethiopia) have successfully competed Make Barefoot Sandals. Some studies even suggest that running barefoot might also result in fewer injuries![2] If you are interested in starting out in barefoot running and want transition footwear, or if you're already minimalist running or looking to extending your outdoor running season, then these might be the shoes for you.

Steps

  1. Gather the materials listed below.
  2. Cut the leather down the middle so that you have one rectangle for one foot and one for the other.
  3. Put on your socks if you don't have them on already.
  4. Apply Shoe Goo as evenly as possible to the rough side of one of the leather rectangles. Put newspapers down first to protect the surface beneath.
  5. Quickly stand on the rectangle squarely with one foot.
  6. Using your hands, press and hold the leather sole onto the contours of your foot. You may alternatively stand on a pillow covered in paper, a bag of beans, foam, or anything else you can think of to form the sole to your foot.
  7. Repeat the process for the other foot.
  8. Wait until the glue sets, usually about 24 hours.
  9. Trim the edges of the leather to round it into more of a sole shape.
  10. With your foot in your new shoe/sock, glue down any little flaps and edges. To prevent pleating, you can cut small triangles out to fit the sole up the heel and around the toes.
  11. Let the glue cure. You may waterproof the soles at this time, if you wish.
  12. Run.

Video

Tips

  • Don't use expensive socks. Rough terrain will destroy a pair of expensive socks as fast as cheap ones. The pair in the pictures were obtained at a military surplus store for $3.
  • You may want to extend the leather up over your toes. When running on uneven ground, the leather edge can catch if you don't lift your foot high enough after a step.
  • If you fear getting the adhesive on your foot, wear an extra pair of socks under your shoe/socks or wrap your feet in plastic wrap before hand. Do not fill the socks with rice or beans to attach the sole. If you do, the sole will not fit your foot.
  • If you are working with irregular or scratch leather pieces, be sure to protect the outside edge of the foot, the forefoot, and the toes more because they hit the ground with more force than the heel and arch in barefoot running.
  • This is a homemade version of commercially available minimalist running footwear.

Warnings

  • Follow all directions and precautions associated with adhesives and waterproofing agents.
  • This will not make you good at running barefoot.
  • Be careful when beginning minimalist running. Modern shoes are carefully designed to support your foot. As a result of wearing these shoes constantly, the muscles that you use for stability may not be strong enough to keep you from getting injured when running barefoot.
  • While the human body may be well adapted to running barefoot, it is not well adapted to running on asphalt. If you decide to run on a hard surface without shoes for support, keep in mind the long-term effects that it will have on the health of your joints.
  • This shoe will not protect you from all the dangers of barefoot running.

Things You'll Need

  • Use a thick wool-blend or synthetic fiber pair of socks (cotton is not recommended). They should be fairly snug fitting so your feet don't slide around too much. Too much slack may be uncomfortable and possibly unsafe.In the pictures show a pair of very tight fitting military surplus wool-blend socks.
  • A patch of leather. Be sure it is large enough for you to stand on with no part of your feet on the floor. Ideally, it would be larger than that, so that it can wrap around your feet a little. Also, make sure at least one side of the leather is rough.
  • A tube of Shoe Goo shoe adhesive and sealant.
  • scissors
  • (optional) Leather waterproofing and conditioner. You can find this for treating leather boots and shoes.

Related Articles

Sources and Citations

You may like