Connect VoIP Phone Service to a Home Phone System

Did you know you can hook up all your existing house phones and use VOIP (Voice-over-Internet Protocol) right in the comfort of your own home if you're not using your local phone company service? Well, now you do! Your technology at home is easy to streamline and make more accessible. Start with Step 1 to get started!

Steps

1. Go out to your demarcation point on the side of your house where your house connects to your local phone company, and disconnect the incoming phone line from the network. This will isolate your in-house phone line from the phone company and protect your VoIP adapter from damage.
2. Plug one end of a RJ-11 phone wire into the phone port of the VoIP adapter and the other end into the telephone wall outlet. This will activate all your existing home phone wiring on the VOIP phone service.

Tips

• Remember that you will lose your VoIP phone service when your broadband service goes out. You will also lose your VoIP service when the power goes out, unless you have your modem, router, and VoIP adapter connected to a good Uninterruptible Power Supply, which will extend the time that your service will operate during a power outage.
• Activate the VOIP phone service with one phone connected to the phone adapter before you try to connect it to your home wiring.

Warnings

• Do Not try connecting a Phone adapter to a live phone jack without disconnecting the demarcation point. This will overload your phone adapter and then you would have to replace it.
• Most VOIP companies have Terms of Service wording that releases them from liability for basically anything. This includes service outages and damaged equipment. Use at your own risk.

Related Articles

• Compare Phone Companies
• Choose a VOIP Service Provider
• Tell if a Mirror Is Two Way or Not
• Make a Free 0800 Reverse Call
• Connect Phone Jacks
• Install a Polycom Conference Phone

See also

• Make Phone Calls over the Internet
• Use VoIP