Build a Drip Watering System for Outside Plants

Template:StubSaving water, time, and labor can all be achieved in one go by using a drip watering system. Setting up one of these systems depends on which method you'd like to follow; this article suggests the container method and the hose method.

Steps

Container Method

1. Buy a sturdy plastic container, such as a milk jug.
2. Punch several holes into the container using a nail. Make sure the holes are clear and fairly small (about 1-2mm across).
3. Bury the container in your garden or in an outdoor garden pot, with the top sticking out. If you like, you can pile some rocks around it for aesthetic appeal.
4. Use a hose and funnel to fill your container. Refill as needed.

Hose Method

1. Buy a length of sturdy hose. This is available at most garden stores. Be sure to buy a cap for the end, or your system will not work.
2. Using a nail, punch a series of holes about 4 cm (2 inches) apart along the length.
3. Attach one end of this hose to a spigot.
4. Lay the hose among the plants you intend to water. If you like, you can bury the hose in the ground.
5. Turn the spigot on to medium flow.
6. When you're done watering, turn off the spigot.

Things You'll Need

• Nail
• Plastic bottle
• Hose with cap
• Spigot
• Garden to water
• Trowel or other digging tool (optional)
• Rocks (optional)
• Other hose

Related Articles

• Xeriscape
• Create a Patio Garden
• Repair a Sinking Stone Patio
• Landscape With Solar Lighting
• Grow a Container Garden

See also

• Install a Drip Irrigation System
• Make a Drip Irrigator from a Plastic Bottle
• Replace a Lawn Sprinkler Timer
• Repair a Broken Sprinkler Line
• Set up an Inexpensive Irrigation System
• Repair a Pop up Sprinkler Head

What links here

• Macrame
• Build a Barn
• Choose the Best Time for Watering the Garden
• Keep Tomatoes from Splitting
• Make a Bottle Watering Can
• Practice Square Foot Gardening
• Prepare a Hanging Basket
• Xeriscape