Make Shampoo

Revision as of 19:57, 4 April 2017 by Kipkis (Kipkis | contribs) (importing article from wikihow)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Commercial shampoos contain harsh cleansers called sulfates that can dry out and damage your hair over time. If you want healthy, shiny hair you can create your own shampoo using inexpensive ingredients. Learn how to make shampoo with castile soap, with soap flakes, and with baking soda.

Steps

Soap Flakes Shampoo

  1. Gather ingredients. This shampoo recipe can be made with any type of soap flakes. Castile soap flakes are commonly used in shampoo, but you can also make shampoo using flakes you create from a regular bar of soap. Just make sure the soap is made with natural ingredients that you'd want to use in your hair. You will need:
    • Soap flakes
    • Boiling water
    • Almond oil
    • Essential oils
  2. Flake the soap. If you didn't buy pre-flaked soap, use a cheese grater or a knife to cut off small flakes that will dissolve in hot water. You need about 4 ounces of flakes to make a quart of shampoo. Place the flakes in a large bowl.
  3. Boil the water. Pour a quart of water into a small saucepan and bring it to a boil on the stove. Alternatively, heat a quart of water to boiling in the microwave.
  4. Pour the water over the flakes. The boiling water will immediately dissolve the small soap flakes. Use a spoon to stir the mixture to make sure the flakes dissolve completely.
  5. Add the oils. Pour in 1/4 cup almond oil and 8 drops of your favorite essential oil, like lemon balm or peppermint. Stir the mixture well and allow it to cool.
  6. Pour the shampoo into a bottle. Use a funnel or simply carefully pour the shampoo into an old shampoo bottle to store it for later use.

Castile Soap Shampoo

  1. Gather ingredients. Shampoo for dry hair has ingredients that provide extra moisture and prevent the hair from getting too frizzy. Dry hair is also susceptible to getting damaged and broken, so this shampoo is made to strengthen the hair shaft. Pick up these ingredients from a health food store:
    • Chamomile tea
    • Liquid castile soap[1]
    • Olive oil
    • Tea tree essential oil
    • Peppermint essential oil
    • Rosemary essential oil
  2. Make the tea. Steep a chamomile tea bag in 2 oz. boiling water for 10 minutes. If you have loose chamomile flowers, use about 1 tablespoon. Strain the tea and set it aside to cool.
  3. Heat the castile soap. Pour 12 oz. of soap into the measuring cup. Heat the soap in the microwave in 1-minute increments until it is hot. Do not bring the soap to a boil.
    • You can also heat the soap in a small pot on the stove; just make sure it doesn't get too hot.
  4. Add the oils. Stir in 1/2 oz. olive oil, 1/4 oz. tea tree oil, and 1/8 oz. each peppermint and rosemary oils. Stir the soap, gently after adding each oil. If bubbles form, spray the surface of the soap with rubbing alcohol.
  5. Mix in the tea. Add the chamomile tea to the hot soap. Pour it slowly to avoid creating bubbles. Set the shampoo aside to cool. Transfer the cooled shampoo to the 16 oz. bottle.

Baking Soda Shampoo

  1. Gather ingredients. Baking soda shampoo is a dry alternative to regular wet shampoos. You can use it in between washing to absorb the oils in your hair and keep it looking and smelling fresh.[2] Aside from baking soda, gather these supplies:
    • Cornmeal
    • Ground oatmeal
    • Dried lavender
  2. Mix the ingredients. Mix 1/2 cup baking soda, 1/2 cup cornmeal, 1/4 cup dried oatmeal and 1/8 cup dried lavender. Place the mixture in the bowl of a food processor and grind to a fine powder.
    • If you'd rather not grind the ingredients, you can skip the dried oatmeal and lavender. The shampoo will work will without these ingredients.
    • A blender or coffee grinder will work in place of a food processor.
  3. Place the mixture in a spice shaker. Pour it into an empty, clean salt or pepper shaker, which you can use to shake the mixture over your head when you want to use it. Store the remainder of the shampoo in an airtight container so that you can use it when it's time to refill the spice shaker.
    • Use the dry shampoo when your hair is completely dry. Otherwise, it will stick to your hair.
    • Apply the shampoo to your roots, use a brush to distribute it throughout your hair, let it sit for 10 minutes, then brush it vigorously to remove the excess powder from your hair.

Essence Shampoo

  1. In a large bowl, add the following:
    • 1 raw egg
    • 1 tablespoon sugar
    • 1/2 cup iced tea.
  2. Mix it properly to make a sticky solution.
  3. Sprinkle in some cinnamon powder in the solution to make it smell nice. Then put in a few drops of vanilla essence/extract to calm the food odors.
  4. Squeeze some lemon in it to avoid dandruff.
  5. Add a tablespoon of salt.
  6. Peel a banana and mash it. Put it in the solution (make sure that the banana is completely mashed). Add the peel as well.
  7. Mix the whole solution in the grinder or blender. Blend until it forms a really smooth paste.
  8. Add approximately 50 soap flakes to the mixture. Add 50 ml water (half a glass). Mix it thoroughly.
  9. Return to the blender or grinder. Blend until it's completely smooth.
  10. Use the shampoo. Put it in your hair. Leave for max 3 minutes.
  11. Wash out thoroughly. You will be left with shiny, soft and manageable hair.

Video

Tips

  • Experiment with different essential oils to find the combination that's right for your hair. If you have dry hair, use more oil; if you have oily hair, use less.

Related Articles

Sources and Citations