Difference between revisions of "Build a Homebrew Kegerator"
m (importing article from wikihow) |
m (Text replacement - "== Video ==" to "") |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | This guide demonstrates how to build a kegerator that utilizes a cornelius 5-gallon ball lock keg and has a tap (faucet) with shank installed in its door. It is relatively simple to build this type of kegerator, yet the kegerator will dispense your superb homebrew without compromise. | |
[[Category:Beer and Cider]] | [[Category:Beer and Cider]] | ||
| Line 43: | Line 43: | ||
# If desired, install a drip tray. Drip trays will keep beer from dripping onto the floor, and are a handy place to set down foamy glasses. Drip trays are secured with two or more self-tapping [[Reinstall Screws and Bolts|screws]] that will be included with the tray, so no pre-drilling is required. The drip tray's screw holes will allow the trip tray to be removed from the door. The drip tray should be centered directly under the tap, and leveled with a level. Allow for adequate space between the tap and the drip tray so that you can readily put glasses under the tap with plenty of room to spare. When you know exactly where to set the drip tray, mark the drip tray's screw holes with a pencil while holding it against the kegerator's door, then line it up with the holes and secure it using an electric drill (it should be possible to use a regular screwdriver, but it may be somewhat difficult). Do not overly tighten the screws against the drip tray, as the drip tray will be pulled free from the screws for regular cleaning. | # If desired, install a drip tray. Drip trays will keep beer from dripping onto the floor, and are a handy place to set down foamy glasses. Drip trays are secured with two or more self-tapping [[Reinstall Screws and Bolts|screws]] that will be included with the tray, so no pre-drilling is required. The drip tray's screw holes will allow the trip tray to be removed from the door. The drip tray should be centered directly under the tap, and leveled with a level. Allow for adequate space between the tap and the drip tray so that you can readily put glasses under the tap with plenty of room to spare. When you know exactly where to set the drip tray, mark the drip tray's screw holes with a pencil while holding it against the kegerator's door, then line it up with the holes and secure it using an electric drill (it should be possible to use a regular screwdriver, but it may be somewhat difficult). Do not overly tighten the screws against the drip tray, as the drip tray will be pulled free from the screws for regular cleaning. | ||
| − | + | ||
| − | + | ||
== Tips == | == Tips == | ||
