Grow Tomatoes Upside Down

Revision as of 23:24, 17 January 2017 by Kipkis (Kipkis | contribs) (importing article from wikihow)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Tomatoes are a popular plant for beginner and advanced gardeners alike. They are easy to grow and don't need a lot of space. This wikiHow will show you how to grow tomatoes upside down using a plastic bottle.

10 Second Summary

1. Cut the bottom off of a plastic milk jug and remove the cap.
2. Take a small tomato plant out of its original pot.
3. Feed the plant's roots through the top of the jug.
4. Turn the jug upside down so that the plant hangs upside down.
5. Fill the jug with a mixture of compost and garden soil.
6. Poke holes in the cut edge of the jug.
7. Thread some string through the hole and hang it up.

Steps

  1. Set up the hanger. Choose a sunny place indoors to hang the tomato plant's container. Your plant can be hung from a hook in the ceiling or tied around a beam––use what works for the space you've allotted.
    • If you're using a basket around the bottle, using string or twine, knot the basket to create hangers for attaching to the hooks or around the beams. Attach the basket to your ceiling or beam, ready for the adding the plant. When selecting the basket, choose one that will hold the upside-down milk or juice bottle that you'll be using without slipping out or toppling sideways. Be sure to check this before hanging the basket up! This step is prettier but optional, as you can also use the bottle direct (see below).
  2. Select a small tomato plant. Plants bought or grown from seed are both fine choices. Water this plant well and set it to one side.
  3. Take the large, clean plastic milk or juice bottle and cut off the base. Remove the lid. See the image for more details.
    • Tie string or twine to the edges of the cut end of the bottle for hanging. Punch out the holes using a hole puncher, or use a sharp tool to insert holes through which the string can pass. Knot the string in place with loops to attach to the hangers you've made. While the image shown later in this tutorial shows two holes, you may find three holes produces a better balance––experiment to see what works best.
  4. Take the tomato plant out of its original pot. Gently set it upside down in the milk or juice bottle. Gently feed the plant through the pouring hole, so that the tomato plant is hanging out of the hole, with the roots still inside the bottle.
  5. Fill the milk bottle with a mixture of good compost and garden soil. Then water it. (Now you see why the hanger was put up first - it's impossible to put the plant on a surface without covering it in soil or damaging the plant.) If using a basket, insert the bottle into the hanging basket for hanging; if not, simply hang the bottle direct to the hangers. You're now ready to begin growing your upside-down tomato plant.
  6. Water your upside-down tomato plant regularly. The easiest way to water is to purchase a plant watering bottle which contains a hooked tube that sucks up the water and delivers it via the hook into the top of the container; you simply hold up the bottle, tuck the hook over the top of the container and squeeze the water in. These can be purchased from garden and hardware stores.
    • Be aware that the water tends to dribble out of the neck of the bottle; this will gradually reduce as the root system develops.
    • Try putting another plant underneath your hanging tomato plant to catch the extra water that escapes, or place a container under the plant to catch the water and use it to water your other hanging tomato plants. Another option is to hang the plant where it doesn't matter as much where the water drips, such as on your balcony.
  7. Finished.

Video

Tips

  • Make sure the tomato plant gets plenty of sunshine, as sunlight is the key to dark, ripe tomatoes.
  • To adapt it to suit a hanging basket, cut a hole in the bottom of the basket liner and follow the above steps. Similarly, you can grow tomatoes in the style of a hanging basket by cutting off the bottom of a bottle and growing the tomato plant out of the top of it with the vines hanging over the edge.
  • Make sure the hook or beam is secure, as the plant can get quite heavy once it begins to fruit.
  • Your tomato plant will grow downwards, so hang it somewhere it won't be in the way of foot traffic, pets or anything else. (Definitely don't hang it over a fish tank or in front of the TV!)

Warnings

  • Don't over water; any plant that receives too much water in an indoor environment risks mildew or damp-related disease.

Things You'll Need

  • A large plastic milk or juice bottle, clean it well and dry before using
  • A young tomato plant
  • Compost and/or garden soil; choose a mix that's healthy for tomato plants
  • Trowel
  • Scissors/craft knife
  • String or twine
  • Hook in the ceiling (optional, if you have something else it can be hung from)

Related Articles

You may like