Pierce Your Own Belly Button at Home

Revision as of 04:22, 25 November 2016 by Kipkis (Kipkis | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Navel piercings are becoming more and more popular. Some people choose to do it themselves for many reasons. If you choose to, read on. However, note that it is always safer to go to a professional.

Steps

Preparing to Pierce

  1. Gather the correct equipment. Using the correct equipment for piercing your belly button is essential. Otherwise, the piercing could go badly wrong or result in a nasty infection. To pierce your belly button in the safest way possible, you will need:
    • A 14 gauge sterile piercing needle, a 14 gauge belly button ring made from stainless steel, titanium or bioplast, some rubbing alcohol or alcohol wipes, a body ink marker, a piercing clamp and some cotton balls.
    • Using a sewing needle, safety pin or piercing gun to pierce your belly button is a bad idea, as these items are unsafe and will not produce good results.
  2. Create a hygienic environment. Before you proceed with piercing your belly button, you will need to take all precautions necessary to eliminate the chance of getting infected. Spray any used countertops or tables with a disinfectant (not an antiseptic).
  3. Wash your hands. Don't forget to wash your hands (and lower arms) in warm water! Everything needs to be completely sterile. An even safer precaution is wearing latex gloves (if they're sterile and haven't been sitting out). Dry your hands with a paper towel--not a cloth towel that's porous and attracts bacteria.
  4. Sterilize the clamp, piercing needle and belly button ring. If you have bought all of these items new (which you should have) they should be in sterile packaging. However, if they did not, or you have handled them already, you will need to sterilize them yourself before piercing.
    • You can do this by submerging the items in rubbing alcohol or hydrogen peroxide and leaving them to sit in the liquid for a minute or two.
    • Remove them from the liquid (wearing clean latex gloves, if possible) and leave them on a clean piece of paper towel to dry completely.
  5. Clean around the belly button. Before piercing, it is necessary to thoroughly clean in and around the belly button to remove any bacteria from the surface of the skin. It's best to use a disinfecting skincare gel especially designed for piercings (such as Bactine) or rubbing alcohol.
    • Generously apply the disinfectant or rubbing alcohol to a cotton ball and wipe thoroughly around the area to be pierced. Wait for the area to dry completely before proceeding.
    • If you are using rubbing alcohol, it's important to use one with a concentration of above 70% isopropanol, to achieve the necessary level of disinfection.
    • If necessary, use a Q-Tip or other similar device to get inside your navel. Make sure to clean both above and below the piercing site.
  6. Make a mark where the piercing should be. Before you pierce, you will need to have some idea of where the needle is going, so using a body ink marker to mark the entrance and exit locations of the needle is a good idea.There should be approximately 1 cm (.4 inches) between the navel and the pierced hole.
    • Belly button piercings are typically located at the top of the belly button, rather than the bottom, but the choice is yours.
    • Use a small hand-held mirror to check if the two marks are aligned horizontally and vertically. Only do this while standing, as your stomach scrunches up when sitting and will not give you a straight pierce.
  7. Decide whether you want to numb the area. Some people who are squeamish about pain may want to numb the skin around the belly button with an ice cube wrapped in paper towel before proceeding.
    • However, it is important to be aware that numbing the area with ice will also make the skin tough and rubbery, making it harder to push the piercing needle through.
    • Alternatively, you can apply a little numbing gel (such as those used for numbing gums before injections) to the area using a q-tip.
  8. At this point you may want to unscrew the ball from the top of the belly button ring (leave the bottom intact). You don't want to be fumbling with this while struggling to hold both the clamp and the needle in place.

Piercing the Belly Button

  1. Clamp the cleaned area. Now you are ready to begin! Take the piercing clamp and use it to clamp the skin of the navel and pull it out from the body slightly.
    • The entrance point you marked with the body ink should be centered in the bottom half of the clamp, while the exit point should be centered on the top half.
    • Make sure to hold the clamp with your weaker hand, as you want the stronger, steadier one holding the needle.
  2. Prepare the needle. Take the sterilized, 14-gauge piercing needle. This needle has a hollow center, which will allow you to easily insert the belly button ring once you have pushed the needle through.
  3. Pierce from the bottom up. Align the sharp end of the needle with the mark on the underside of the clamp. Take a deep breath, then with one fluid movement push the needle through the skin, making sure that the needle exits through the mark at the top of the clamp.
    • Never pierce from the top down. You need to be able to see where your needle is going and you can't do this if you're piercing downwards.
    • The best way to pierce is while standing up, as this will give you the most mobility and allow you to see what you're doing. However, if you're concerned about fainting, pierce while lying down (not sitting!).
    • Don't be concerned if the piercing bleeds a little -- this is totally normal. Just wipe away the blood with a clean q-tip dipped in saline solution.
  4. Insert the belly button ring. Place the end of the jewelry without the ball into the hollow needle (it should be virtually flush or slightly smaller than the needle) and push the needle out with the jewelry. DO NOT pull the needle out. You want to keep the contact between the needle and your navel ring for a smooth transition. The needle will fall off the end of the jewelry as it exits the skin so be prepared to catch it.
    • Refrain from pulling the needle out to soon, before the jewelry is fully through!
    • Take the loose ball and screw it tightly onto the top of the belly button ring. Tah-dah! Your belly button is pierced!
  5. Clean your hands and the piercing. As soon as you've finished, wash your hands with antibacterial hand soap. Then take a cotton ball soaked in a saline solution or a cleaning solution and very gently clean around the piercing.
    • This is the first day of your cleaning regimen and arguably the most important. Take a few minutes to be thorough.
    • Don't tug at your new piercing. Clean it and leave it alone to heal. Touching it or playing with it will only lead to infection, which is the last thing you want.

Following the Correct Aftercare Procedures

  1. Take care of your piercing. The work isn't over yet! Remember that a new piercing is like an open wound, so it is extremely important that you maintain a strict cleaning regimen over the next couple of months. You will need to keep this up until the piercing heals completely, in order to prevent any itching and infection.
    • Wash the piercing with antibacterial soap once a day. Avoid rubbing alcohol, peroxide, or ointments, as these can be very drying and irritating on the skin of used everyday.
  2. Clean with a salt solution. A great way to keep your new piercing clean and free of infection is to use a salt solution. You can buy a saline solution at a drugstore or piercing studio, or you can simply dissolve some non-iodized sea salt in a cup of warm water.
    • Dip a q-tip in the solution and use it to carefully clean around both ends of the piercing.
    • Gently push the jewelry from one side to the other in order to clean the ring as well.
  3. Avoid swimming in any water. Whether it's a pool, a river, or a hot tub, stay away for the first few months, as the water can harbor bacteria which can easily infect your new piercing.
  4. Allow the piercing time to heal. If you see a clear or white liquid, it's healing properly. Anything with color or smell is infected and should be seen by a doctor.
    • Some professionals advocate a stringent care routine for up to 4-6 months. After 2 months, assess how your piercing is doing.
    • Don't mess with it! Allow it to heal before you go changing rings. You may replace the balls, but don't touch the barbel. This will not only inflict pain but also slow the healing process.
  5. Keep an eye out for infection. Even after it seems healed, your piercing can get infected. If you suspect an infection (signs include swelling, tenderness, bleeding or seeping) apply a warm compress to the area every three to four hours, then clean with an antiseptic cleanser and apply a topical antibacterial cream.
    • If you don't see an improvement within 24 hours, consult your doctor.
    • If a doctor isn't an option, see a professional piercing artist. They will help you adjust your care routine and give you professional products.
    • Never take the belly button ring when dealing with an infection - this only runs the risk of the infection becoming trapped inside the piercing.

Tips

  • Research belly button piercings. Make sure you really want this and that you are confident to do it yourself.
  • Do not touch your new piercing. Only when cleaning it with an anti-bacterial soap should you get near it.
  • Keep an eye out for infection. If you're questioning it at all, see a doctor.
  • If you feel uncomfortable piercing your own bellybutton, seek a professional piercer.

Warnings

  • Do not use any products lying around the house. They are not safe and will cause infection.
  • This can cause scarring if you choose not to wear a stud later in life.
  • Doing this yourself is dangerous. If you're dead set on getting your navel pierced, the best idea is to go to a professional.
  • This is not suitable for anyone under the age of 13.

Things You'll Need

  • Sterile needle (14 gauge--you can buy one here.). Do NOT USE A PIERCING GUN. Piercing guns are extremely unsterile and pierce using blunt force.
  • Body marker
  • Rubbing alcohol or other skin disinfectant
  • Clamps/tweezers
  • Sterile starter jewelry (14 gauge and 18mm to allow for swelling, like this. Bioplast or bioflex is best because it can bend with the body and can be cut down to a shorter length when swelling goes down.)
  • Sterile latex gloves (optional but highly recommended)

Related Articles